camshaft

Hi guys! Its been a while since I did any posting on here. So here is a quick update. I have a class project to rebuild my tired 2H. I tore the engine apart last summer and brought my camshaft over to vancouver to measure the camshaft lobes and found that they were all worn out from the...

Hi guys, I am currently rebuilding my 1HDT motor and my camshaft had a bad wear (water or bad lubrication maybe), I decided to buy a used camshaft and then found that it had a light wear as well: My mechanic said its better to not take the risk. So I decided to get my money back and start...

Hi guys, so I am rebuilding my 1HD-T engine, and found that the camshaft had lot of wear, the previous owners that my 80 had didnt care much about the car from what I think. 3 days ago I bought a used cam shaft (original), but today my mechanic sent me this: Check that wear, is very light...

In search of a 4.7 V8 expert. I just replaced the head gaskets on my 2001 LC. I got everything back together and the truck fired right up. As it idled to warm up I noticed a very slight ticking noise that developed as the engine got warmer. Once at normal operating temperature the slight...

Hi All Doing a diagnostic 1FZFE teardown in preparation for a full and proper blueprint. Have done a bit already as you will see on my thread. Just finished detailed valve lash comparisons. 1FZ engine building and blueprinting During teardown I want to map all specs on this engine against...

In preparing to gather parts for a timing belt party this spring for my 2005 LX, I have run into an issue with determining the correct camshaft seal part number. I have called 4 online Lexus parts dealers, and to my disappointment have received a relatively even split of opinion on the correct...

Hello, I have been on this site researchingfor awhile now and decided to now join. Anyway I recently bought a 1972 fj40 for a project and hopefully restore. Im usually good with engine work but this noise has me stumped doesn't sound like rod bearings or anything from the bottom end also not...