Hello everyone,
I was installing my new winch and snapped one of the terminals. I must overtightened it. I can still make a secure connection, but that will require me to remove the nut at the base of the terminal.
I was wondering if that will be okay, or if it will cause problems down the...
Ever see this before? I’ve heard of bending the tie rod but not it breaking like this.
Looks like it napped right where the link ends. Thank goodness this happened when pulling into my garage but so bizarre.
Who makes the best replacement rod kit?
Might as well upgrade but I don’t need...
I'm looking for window for 2nd row passenger side to replace what they smashed last night... will take North American (tinted) or overseas (clear) --- anybody sitting on either one that they will let go?
Thanks in advance...
Yesterday I tried to start the truck and the key wouldn't turn one bit, turning the steering wheel only engaged its lock. I tried two keys (a master and a valet), and neither could turn the lock cylinder.
My pressing problem is that I need to move the vehicle in 3 hours due to parking...
I am preparing my 1965 FJ45 SWB for sale and
The 4wd vacuum control cable broke.
Has any come up with a way to remove the unique Toyota cable from the handle and replace it?
I can't tell if the wire is soldered or leaded into the barrel of the handle or is just press fit.
Anyone have suggestions?
I've got an issue with my A/C that's been driving me nuts for years. This picture sums it up.
No matter what I do, the adjustment is a hair trigger around a certain spot. The spot moves around depending on ambient temp, but a tiny, tiny bit of movement goes from full cold to full hot. In...
my six year old had a field-day with the rear passenger-side TV and cracked the LCD display on my 2016 LC. I called the dealer and they said it was 7K to replace…needless to say I’m not going that route. I’ve done some research, but coming up with only android replacements. Does anyone know...
Here’s one for the DIYer.. Broken H55f from a 1988 JDM HJ61. 2F / H input shaft (although this input shaft is junk so you could put whichever version you want in)
Input shaft is bad and counter shaft is bad. Would recommend a full rebuild kit as well as those parts. I can also sell a new OEM...
I am replacing my valve cover gasket and while wiggling out the Half Moon pieces both of them broke on the outside edge (my luck)......I need to order 2 replacements, can someone help me with a part# or the actual name of the pieces so I can locate them. Searching via "half moon" seems to get me...
Went to check my fluids today and noticed the power steering reservoir cap was loose. Unscrewed it and saw a spring chilling in the hole of the reservoir. I assume my cap is falling apart? If so, I'll just go get a new one but want to make sure I'm not losing my mind first.
All right, so I have an idea for a project. I'm not going to go into details but what I'd like to get my hands on is a broken or damaged awning.
Really all I need is the portion that attaches to the vehicle. All the other bars and everything can be completely busted. I would like something...
Hi all,
Wanted some advice on what the best possible fix for a rusted vacuum connection that broke would be? The vacuum line can't connect anymore because the nipple portion has rusted and broken off. Any ideas?
I'm looking to see if anyone has a broken headlight housing or set of broken headlight housings I could acquire? While I have a 2010 so I believe the mounting points are the same.
Don't care if the front is cracked or busted out. I mainly care about the back piece and mounting tabs.
I removed my lifter cover on my 2f to reseal it, and I have a broken 6mm bolt in the block. Curious what you all think, should I just forget about it and go about my day, or try and remove it? Welding a nut to it is probably not an option, right? I tried drilling it for an easy out, but the hole...
Opening rear door on FZJ80 when exterior and interior handles are not working.
Tools needed for this task:
Panel pry tools, though 1” putty knife will suffice
2 feet of 1/4” round rod, available at any home repair store
Lower window and wedge a gap between exterior window seal and window. You...
Rounded off the plunger nut to the power steering gearbox, I have one more that I am trying to rebuild, anybody have tips to get it out? I tried hitting it with some pb blaster, but I don’t think it would tech the threads and make a difference. The metal seemed pretty soft, as it didn’t take...
I took the truck out on the farm for a drive this afternoon, and the rear diff s*** the bed. Im trying to work out what caused it, Its a 1985 bj73 with a semi floating rear axle, 2 ARB air lockers and 34" tyres.
I drove down a quite steep bumpy hill in 1st letting the engine do all the braking...
I know this isn't classifieds but im in a real pickle, my fj60 is my only transport and the block is bad, read all about it here
Fj60 FlyWheel grinding on the block
If anyone has a good 2f block laying around im buying and need it asap, thanks
Hello dears!
First off, sorry if this is the wrong part of the forum to post in.
I'm from Kuwait, and here the land cruiser has legendary status and loved by everyone, so resale value is skyhigh and parts are abundant everywhere you look.
I recently bought a land cruiser 100 series gxr1 the...