Gas Cap

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Cruiser_Nerd

That 25 Guy.
Moderator
Joined
Dec 3, 2002
Threads
198
Messages
4,369
Location
Higganum.
Anyone have a Rover nut near them? This cap is from a Series 2 Rover (58-71?) and is supposed to measure 90mm (3.5") on the outside. That would make it a tad smaller than the 25 cap.......but it does have three prongs. Worth a try for someone with no cap.
61_1_sbl.webp
8e_1_sbl.webp
 
Vented or non-vented! :)
89_1_sbl.webp
76_1_sbl.webp
 
Does this stuff come to you in visions? How many times have you surfed the entire internet and had to start over? Now go find the part number and application for a 25 ring and pinion!
 
Visions. I don't have time for the internet. :rolleyes:

I believe Mike tried the ring an pinion numbers in one of my wish lists and they were no good. I can dig them up if you want to try. Or send you a diff if you need it. :)
 
:clap:Anymore information on where you got and cost? Did you buy a vent cap? Which style was it and did it included chain? I'm missing one for a FJ25 soft top tank and another from a FJ25 hard top/61 FJ40 fill neck that needs repair.
 
:cool: Better than the typical hacked up Valiant cap.
 
Thanks Jack, your 61 has the same filler neck as FJ25 and will use the large gas cap. I see there is a small vent hole in FJ25 gas cap inside and my phone camera picked up a little vent along the seam. Wow I answered myself - “Now this is first”. :D

F6BEDB06-2480-4E4E-ACC5-8F8DF7709EE2.jpeg
 
Last edited:

Users who are viewing this thread

Back
Top Bottom