Decent cooling system, still runs hot

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Apr 4, 2006
Threads
449
Messages
14,193
Location
NorCal
I went through my cooling system, and replaced my tired radiator with a good looking donor, but not new. She still runs hot. On the stock guage, and going up hill in 80f temps, I hit the 2nd line (2/3 hot?) before switching on the cabin heaters and fan to keep it cool.

Then on the freeway, babying the brakes due to my other problem, we get an uh-oh smell, take an exit and find a blown head gasket. It wasn't running hot when it blew. It just blew.

I'm going to tow it home now. :confused: :crybaby:
 
i m currently having problems with poor circulation in my block. seems like the back 3rd of it gets no coolant at all its probly got 35 yrs worht of crap deposited it there. might wanna check that on yours also. im tryin to get it cleaned out by a rad shop but not sure if they can get it all out or even enough to cool the back of the engine?????
 
Get a real gauge..
 
Could be a false alarm

I found a broken hose in a place I didn't know I had a hose. I thought of a blown gasket before I opened the hood, then I didn't look much at it. The hose was also full of crud. It might be the source of my problem. It's the long 1" hose that starts below the water house and goes around the passenger side of the oil pan to the manifold (?) into which the temperature sensor is screwed.

Stay tuned.
 
Hey Fast, do a real overhaul on the cooling system this time, flush everything, all new hoses, new water pump, thermostat, the little round gasket that sets on top of the thermostat inside the housing, either have that radiator rodded or choke up the cash for a new one, junk the original temp gauge or run it in tandem with an after market one, make sure you have a fan shroud and lastly if you do have a fan shroud and its the tapered one, call Mark at Marks off Road and get an 8 blade fan, trust me on this, I tried the easy way out, learned the hard way, it was 110 deg this weekend in So Cal, wheeled both days, my 2F runs at 160 deg uphill, downhill, idleing, 70 mph up the grapevine, these things are tractor motors, if you do it right they should run coooool. :cool:
 
In my limited experience, cooling problems are 99.9% radiator problems. A good looking radiator could be a plugged radiator plus some spray paint. Get a good 4 row radiator from a good shop and be happy for 10 years.
 
Fast Eddy said:
I went through my cooling system, and replaced my tired radiator with a good looking donor, but not new. She still runs hot. On the stock guage, and going up hill in 80f temps, I hit the 2nd line (2/3 hot?) before switching on the cabin heaters and fan to keep it cool.

Then on the freeway, babying the brakes due to my other problem, we get an uh-oh smell, take an exit and find a blown head gasket. It wasn't running hot when it blew. It just blew.

I'm going to tow it home now. :confused: :crybaby:
If you are hitting the second line on your temp gauge then I would be very concerned. That second mark is a very hot engine. I know from experience, as I hit it just before my head gasket blew, which immediately caused my upper radiator hose to eject. Fortunately, I did not crack or severely warp the head or the block and the cylinder walls were still smooth with no scaring. Toyota makes one fine engine; with 140K miles all six cylinders had no ridge. The culprit was a stuck thermostat that from appearance had stuck from calcification in the coolant system. After fixing everything, including having the entire coolant system power flushed (the rear heater core had to be replaced after that), I changed my choice of antifreeze and now use the same premix antifreeze I run in my turbo diesel 4x4 - Shell ROTELLA® ELC Extended Life Coolant/Anti-Freeze. A "fill for life" ethylene glycol based coolant for heavy-duty diesel, gasoline and natural gas powered engines. My temp gauge now stays under the first mark until I’m at 45-50 which drives the needle to the first mark, running 70-75 on the freeway with the outside temperature above 100 the temperature gauge rises to about 1/8 of an inch beyond the first mark.
 
The second line on the stock gauge is about 210F on my mechanical Autometer. The first line is approx 180F. Not scientific, just thought I'd share my experiences.

210F is not really that hot, depending on what you're working on and who you're talking to.

The whole V8 cooling debate is one I have researched, argued, done wrong and done right. I have no idea how anyone living anywhere the ambient temperature is over 70F keeps a SBC in an FJ40 'cool' with the stock radiator. It depends on how one measures and defines 'cool', I gather. To me, anything over 220-225F is too hot. Others may disagree. The only real soultion I have found to an overheating Chevota is a bigger (larger core surface area) radiator, period. Everything else is a bandaid: pusher fans, DexCool, Water-wetter, solid fans, lower/no thermostat, shrouds, etc.

I put this topic right up there with 2F vs. SBC and the need for a cut and turn with a SOA. Both sides have strong opinions about their reasoning and neither side will ever make the other understand their point of view.
 
Last edited:
dgangle said:
The second line on the stock gauge is about 210F on my mechanical Autometer. The first line is approx 180F. Not scientific, just thought I'd share my experiences.
That is useful info - thanks. It makes me wonder if my temp gauge was not putting out the correct resistance to ground and my temp was much hotter (I have replaced it). When I pulled the head the gasket was cooked to a charred well done. A real pain to get the head off and remove what was left of the gasket on the block. I will say that I definitely prefer the newer style head and manifold gaskets.
 
Do keep in mind that all Stock gauges will not read like that..

They are more of a "about right" gauge than accurate ;)
 
dgangle said:
The whole V8 cooling debate ... overheating Chevota is a bigger (larger core surface area) radiator, period. Everything else is a bandaid: pusher fans, DexCool, Water-wetter, solid fans, lower/no thermostat, shrouds, etc.

I put this topic right up there with 2F vs. SBC ...

Just to be clear, mine is a 2f.
 
We have a 74 FJ40, F engine was overhauled a couple of years ago. Since that time we had an overheating problem. Even used two electric pusher fans and one electric pull fan, still overheated. Cleaned radiator, new hoses, the whole gambit, still overheated.

During a valve adjustment, we noticed that there was very little to no oil going to the top end of the motor, closer to nothing. Even pulled the rocker arm and could not get oil to flow to the top of the engine. Plumbed up a quick/cheap trick from the old Chevy 6 days of routing an extra oil line from the oil pressure sending unit, up into the valve cover and distributed oil to all the rocker arms. Overheating problem stopped. Must be that .1% of overheating problems, but it worked. You may want to check that you have sufficient oil flow to the top of the engine.

From reading other posts, the cause of our oil problem maybe the overhaulers put in a cam that didn’t have the right oil porting holes in it. We’ll check that when we have other work on the engine.

Jerry D.
 
Parts ordered

except for the water pump, which is discontinued by Toyota. I'll just get one from Kragen unless everyone says not to. The one I have is probably ok, and I've got another 2f with one on it...

At least I have a good tow rig. '93 6.5 TDI, pre-badness mechanical FI, Banks exhaust and waste gate mod.
on_trailer.webp
 
Jerry D. said:
We have a 74 FJ40, F engine was overhauled a couple of years ago. Since that time we had an overheating problem. Even used two electric pusher fans and one electric pull fan, still overheated. Cleaned radiator, new hoses, the whole gambit, still overheated.

During a valve adjustment, we noticed that there was very little to no oil going to the top end of the motor, closer to nothing. Even pulled the rocker arm and could not get oil to flow to the top of the engine. Plumbed up a quick/cheap trick from the old Chevy 6 days of routing an extra oil line from the oil pressure sending unit, up into the valve cover and distributed oil to all the rocker arms. Overheating problem stopped. Must be that .1% of overheating problems, but it worked. You may want to check that you have sufficient oil flow to the top of the engine.

From reading other posts, the cause of our oil problem maybe the overhaulers put in a cam that didn’t have the right oil porting holes in it. We’ll check that when we have other work on the engine.

Jerry D.

I'd say the cause of your problem is that the re-builders put your head gasket on upside down blocking the one and only oil galley hole that feeds oil to the rocker arm. I would pull the head and put a new head gasket in and make sure the side that says up is up. Then I would plug your bypass hose as it is not doing the job that the oil galley does. Just feeding oil through the valve cover does not lubricate the rocker arm properly and eventually you are going to have bigger and more costly repairs. You are not the first cruiser owner who has suffer this fate at the hands of an engine builder not familiar with the one way only head gasket.
 
Fast Eddy said:
except for the water pump, which is discontinued by Toyota. I'll just get one from Kragen unless everyone says not to. The one I have is probably ok, and I've got another 2f with one on it...

At least I have a good tow rig. '93 6.5 TDI, pre-badness mechanical FI, Banks exhaust and waste gate mod.
If the pump fits and works then what is the issue.
 
Back
Top Bottom