Recent content by Sasquatch1

Not sure if this helps but it may show you where you are now, and shed light on what is being suggested as a change.

It works! It took four tries, but here is the answer (for my 2019 LC 200)! To program Trans Temp (°F), enter: TXD = 07E12182 RXF = 046105820000 RXD = 2808 MTH = 00090005FFD8 I named mine TRN. I drove around a while and T went up near 150. I’ll be towing in the next few days and we’ll see...

I need help with programming a Scan Gauge II to read the trans temp for my 2019 LC 200 8-speed. I towed over the continental divide (four times, ranging from 11,158 feet to 11,542 feet) last week, my 2019 LC 200 pulling a Lance 2375 camping trailer (28 feet, about 6500 lbs. loaded). Slee put...

Thank you for the feedback. I'll try the clip-on mirrors - I found a set that seem better but I haven't tested them more than 20 miles at 65 mph (my intended top speed). If they are not reliable, hmm ….

Do you ever tow? I face the same decision that you made and I will tow (10% of the time) a 6500 lb trailer with maybe 800 lb tongue weight. Would that have sent you over to the BP-51s?

Hey, guys and gals – I need advice. I have a 2019 Land Cruiser. I plan to tow a trailer (max wt. 7000, probably 6500 or so in practice, TW 800 or so) and want to firm up the suspension. However, I do not off-road and I only tow about 10% of the time. I am working with Slee in Golden, CO. Here...

I am considering these - how are they at 75-80 mph? How is the wind noise versus stock? Can you recommend an installer in the Denver area (I live in Castle Rock)??

I installed mine just about identically to the way you did. I pick up the new camper on Wednesday, so then we'll know if I did it correctly. So far, no warning lights and all is behaving … we shall see. Thank you all for your help! (next question is about mirrors on the LC200 for towing a...

Thank you. This is very helpful. I saw somewhere that buying the wiring from Redarc that connects a Tekonsha port to the Redarc wiring would work (suggesting LC200 is prewired for Tekonsha). Tekonsha Wiring Harness suitable Tow-Pro Brake Controller Harness shows the part. I wonder whether that...

Sweet! Did you buy the Redarc from etrailer.com? What else did you need? Thank you!!

I have a 2019 LC200 and I am wondering whether they still have a brake controller install port? Anyone? Same place as these listed above? Thanks!

Did you get it done yet? I live in the western burbs and I am considering work … how do you like Chitown4x4? The tank?