Recent content by s13koop

  1. s13koop

    1HD-FT overheating

    I really need to get an aftermarket gauge but the stock needle is climbing above 1/2 way.
  2. s13koop

    1HD-FT overheating

    As far as I know the pump is bone stock but I do need to get an EGT in there to get some data. I went with Toyota Red 00272-1LLAC-01 per Muds suggestion. But yea, it just doesn't do it all the time, only on these long trips and even still its on the way back. its also 100+ in Texas right now
  3. s13koop

    1HD-FT overheating

    I looked into possibly pulling the oil cooler off but damn, per the FSM I have to tear down the whole front timing gears?? Visually is the oi lcooler seems to be out of the way of that.
  4. s13koop

    1HD-FT overheating

    The radiator was replaced in Japan at some point before it shipped. I noticed it immediately when I took delivery. Toyota stamp and part# confirmed it was OEM (also it was the cleanest thing in the engine bay lol) Yea I replaced the stock fan with an aftermarket QIKAZZ 4x4 fan clutch...
  5. s13koop

    1HD-FT overheating

    Yea thats basically Texas, no real hills but indeed long and slightly climbing. I started to think radiator even though its new but I double checked and its indeed an OEM Toyota rad.
  6. s13koop

    1HD-FT overheating

    I definitely ordered those items yesterday. Not sure if they were previously replaced. I’ll install and do a long road test run. 🤙🏻
  7. s13koop

    1HD-FT overheating

    Chasing a random overheating problem. A bit of background. Owned it 3 years now and have taken it from Texas to CO, AR, and long road trips within the state. The issue is it doesn't overheat everytime, in fact its only slightly risen in temps 3 times since I've owned it. Most notably after...
  8. s13koop

    Whiteline Sway Bar Compatibility and Recommend End Links 3" Lift

    I did not. I only added the rear sway bar & links as my 80 had pretty bad body roll when I got it. (Soft 3" lift springs that it came with from Japan) I was trying to stiffen that up for on highway use. I'd like to add from at some point but It hasn't hindered me while off roading yet.
  9. s13koop

    Whiteline Sway Bar Compatibility and Recommend End Links 3" Lift

    Should be ok but may need to check your frame for the threaded holes for the bracket. Mine had them already so no Rivnut needed
  10. s13koop

    Whiteline Sway Bar Compatibility and Recommend End Links 3" Lift

    What year is your 80? Mine is a '96 (JDM) and didn't have to rivnut anything. Straight forward install
  11. s13koop

    Whiteline Sway Bar Compatibility and Recommend End Links 3" Lift

    Although I don't have an Icon lift I do have a 3" lift on Dobbies I went with the same whiteline sway bar with LCP sever duty links from @LandCruiserPhil Worked a treat. Sever Duty Rear Sway bar Links
  12. s13koop

    Campsite recommendations for an Arkansas Spring trip.

    Houstonian here We've been going past 2 years and always find something new. Do you have OnX by chance? Can PM you some stuff Last year we were more on the western side of AR and camped Devils Knob/lookout and areas around Ozark AR (Mulberry River/Redding Loop)
  13. s13koop

    What Did You Do with Your 80 This Weekend?

    Took me a few holiday weekends but I finally finished installing one of the (rear)ARB lockers I ordered BF2024 Decided to test it out at Hidden Falls. Didnt get to use it as much as I wanted but it did lock when I needed it to Made the 500mi trip home so I guess thats a win. Now onto the front...
  14. s13koop

    What Did You Do with Your 80 This Weekend?

    Finally after ordering F&R ARB lockers from East Coast GS I'm getting around to installing them. Started with the rear. Never set one up before so this will be interesting. One thing I noticed was all the youtube vids and threads here show different looking carriers which made removing the ring...
  15. s13koop

    NEW 80 Series Multigauge Clock Replacement

    I've not noticed any issues with brightness, day or night. My only complaint is when wearing polarized sunglasses it's obviously dim but thats on me.
Back
Top Bottom