Recent content by Rubibu

  1. Rubibu

    help needed: noise when A/C compressor comes on

    Hey folks, I've been doing research on mud for a couple of days now but I might need some direct help from the community. While driving home from a 2000 mile roadtrip last september, there more or less suddenly (or maybe I recognized it only then when I was leaving the autobahn and everything...
  2. Rubibu

    What have you done to your 100 Series this week?

    Got my LX a set of AT tires :steer: I steped up to 33's (275-70-R18) from Nokian. The Rotiiva AT Plus is very quiet on the road (hardly noticable), has really good behaviour on wet pavement and I like the style of them, while beeing all-season-tires for winter use on german regulations. As I...
  3. Rubibu

    What have you done to your 100 Series this week?

    I hope to get your question right and respond to it in an appropriate way - otherwise, please correct me. Short answer: I don't know for sure. Guess: UZJ 100 (7 seater) Long answer: See below As stated on their website Blickdicht Manufaktur has been manufacturing blidimax for man different...
  4. Rubibu

    A Cruisers Evolution - building the LX470

    Sidewings: I made pictures of the platform today and wanted to share some of the sidewings in place. The gaps are about 7mm wide to allow the sleeping platform to be slid in.
  5. Rubibu

    A Cruisers Evolution - building the LX470

    Of course I wouldn't be bothered at all if you'd copy (or anyone else) but hearing to have set up impressive work is never a bad think I guess. Thanks for the compliments 🍻
  6. Rubibu

    A Cruisers Evolution - building the LX470

    For the ones that liked having a video on the drawers and teflon slides, I made you another one minutes ago after waking up in the middle of the forest from a wonderful night on the platform. The only anoying thing is the hard, almost scratchy sound of the sliders in the vid as in reality...
  7. Rubibu

    What have you done to your 100 Series this week?

    Received some sunblinds for the windshield and the front side windows. https://blickdicht-manufaktur.de/blidimax-black-107.html They are made by "Blickdicht Manufaktur" from a fabric called 'blidimax black' which reflects infrared radiation and thus prevents from heating up although it is black...
  8. Rubibu

    A Cruisers Evolution - building the LX470

    Thanks man! I think there still are some details coming soon that might be of interest to some of you and I'm happy to share and give something back to this amazing community which has already helped me a lot. I guess I wouldn't have gotten that deep into Land Cruiser mechanics and self...
  9. Rubibu

    A Cruisers Evolution - building the LX470

    The table got a rim all around so it slides into the compartment on wood, not on it's legs which also makes for a nicer appearance and feel when handling the table. A nice coat of milk paint again and some sealant but in a warm blue this time finished up the top to my satisfaction. The height...
  10. Rubibu

    A Cruisers Evolution - building the LX470

    The legs are screwed to the tabletop with pipe clamps of 1/2" diameter so they cant move around but can be swung out. All parts used are stainless steel to prevent rust even when camping on the beach. To stay under 26mm in height, I had to recess the legs a little into the tabletop.
  11. Rubibu

    A Cruisers Evolution - building the LX470

    Table Another challenge had been to fabricate a table that is less than 26mm in height once folded to fit into its platform compartment, sturdy enough to be suitable for everyday camping life, nice to the touch (usually I dont like metal surfaces or plastic if I can avoid them so wood was very...
  12. Rubibu

    A Cruisers Evolution - building the LX470

    Fully extended: In 'travel mode': You hardly notice the transition from one part to the other when laying on a mattress >3cm and setting it up takes only about a minute. Everything laying on top can stay there and can be rearranged once everything is set up.
  13. Rubibu

    A Cruisers Evolution - building the LX470

    Sleeping Platform As my first version with the temporary platform had a sleeping extention that had to be unfolded two times over the folded down backseats and my experience showed that I didn't like it that way at all, I had to better come up with and alternative: You had to pick every item...
  14. Rubibu

    A Cruisers Evolution - building the LX470

    Platform Once again it was time to work on the platform and get some progress towards finishing the framework. The Plywood separating the two drawers was made exactly like the bottom of the platform to accomodate the teflon strips and has been made from 10mm plywood too to support the weight of...
  15. Rubibu

    A Cruisers Evolution - building the LX470

    Sidewings and Infills These parts were jigsaw cut from 10mm plywood after transfering the cardboard patterns I made while the platform was inside the car for testing. The edges were sanded and the infills got a little bevel on top from the outside so you can later grab the sidewing more easily...
Back
Top Bottom