Recent content by Plamen

I am very curious what was the end result

Well, I can only imagine how the air injectors are tapped. In your case I would make the proper fix and use the genuine Toyota plugs mentioned in one of my previous posts

From your photo I can only see the air injector rail's "shield" still mounted. Its hold in place by three bolts and can also be removed: As a reference for vacuums I am also providing a link to the Vacuum desmog information diagram which I hope you may find useful...

Thank you very much Sir! Have a great day! :)

Hi @woody sorry for bumping this old thread - I did not want to start a new one. May I ask you to please grant me permission to upload to the resources section? For starters I would like to post a 3FE vacuum desmog guide I have created and which was peer reviewed by the comunity. Thank you...

The pipe looks like this: Probably the PO made the proper fix - removed the pipe and capped the air injector holes with genuine Toyota caps. If not this is their PN: 90340-14001.

Wrong reply, sorry

I don’t think the connector is provided as a spare part. Originally its part of the fuel bracket: i can make more detailed photos after the weekend:

Hello. I have a question regarding compatibility of 1FZ-FE's fuel pump on a 3FE. I am in the process of migration from 3FE's original 23221-46060 fuel pump to 1FZ-FE's 23221-66040. I have already bought new pump bracket (23206-66900), fuel sender gauge (83320-69055), all bits and pieces...

Hi mate, you are also missing the “cap hanger”:

Looking great :)

Hi @Greek Cruiserhead sorry for my slate response, somehow I have missed it. Regarding the spare parts - I get them from the OAE & Japan dealers (Partsouq, Japan4x4, Megazip etc.). Our local Nissan dealers are so obsessed with selling you new cars that they absolutely ignore any requests for...

@kangjinsoo another thing to note - what's the diameter of the caps you are using for the smaller lines? If I am correct (based on forum knowledge) they are 3.5mm. From my experience 4mm caps are a bit loose, and I used silicone 3mm which are a bit tighter but fit great.

Hi mate, attached I am providing a modified Desmogged vacuum hose information. Its based on the Toyota one, but its color coded for easier line following and I have marked the capped ones with cap icons. I have spent much time reading thought many desmogged threads here in the forum, inspected...

If you are focused on an 80 series LC, petrol with manual transmission (point 8) your only choice are Middle eastern imports. Apart from the even worse fuel mileage than the US models you may have troubles registering such a vehicle in the EU.