Recent content by osaga

  1. O

    NinjaCruiser 100 series LED Headlights

    Amazing! Can you tell if the ninja headlights are OEM Toyota glass housings? How was the shipping time from Malaysia? Any idea if they offer an HID version?
  2. O

    Door Lock Actuators

    Has anyone tried ABS glue? I used loctite plastic epoxy on all 5 doors and one separated after a few months. Upon inspection the epoxy did not grab the plastic much at all. I replaced it with an AISIN actuator assembly which looked exactly identical to the oem original.
  3. O

    Door Lock Actuators

    I'm not sure if this is your problem but on the front passenger door there is a "lock position sensor" that sits on the back side of the keyed cam lock inside the door panel. It's possible it became dislodged?
  4. O

    How to: Replacing OEM Subwoofer in 3rd Row

    It was about $30, very well designed but it is specific to the Wavecore 6.5" since its mounting holes don't naturally line up on the factory enclosure. I 3d printed a simpler adapter and have a couple extra if anyone wants one. See here on eBay. Miraculously the screw holes on the Skar line up...
  5. O

    How to: Replacing OEM Subwoofer in 3rd Row

    I've now tested a couple more subwoofer drivers since my last post: The 7" Wavecore, and the 6.5" Skar. I ran each for a week and have some information to convey in case anyone finds this useful.... If you're running the factory amp, the 6.5" Wavecore in my previous post is a great choice for...
  6. O

    Should I drive it or have it shipped?

    Looks like a beautiful example of the greatest car ever made. For modernization I would recommend a Sony xav-9000es (screen quality and features) for CarPlay integration and some new speakers (Morel or Focal are great), and a backup camera. You'll have to also replace or bypass the factory amp...
  7. O

    How to: Replacing OEM Subwoofer in 3rd Row

    "Grom Audio" the people that make carplay integration adapters for the 100 series infotainment system have a recommendation for a factory sub replacement for 100's: The Wavecor SW168WA01 6.5" subwoofer (which you can buy online from PartsExpress). You can also buy a 3d printed adapter ring...
  8. O

    Keyless Entry chirp added to 98' 100- EZ Mod

    How'd the install go? Nice having that beep ay?
  9. O

    Door Panel Clips that work better than the originals

    I recently found that BMW OEM panel clips are much tighter fitting than Toyota's. I purchased OEM and aftermarket BMW clips and the OEM version is better, avoid the aftermarket version. So go to your local BMW dealer for great clips. BMW Part number: 51418224768
  10. O

    Should I drive it or have it shipped?

    https://forum.ih8mud.com/threads/2004-100-series-value-question-part-out-or-sell.1382246/ Just don’t let her out in the winter
  11. O

    Keyless Entry chirp added to 98' 100- EZ Mod

    I recently completed this project and it was surpassingly easy once you identify the connector in the drivers side footwell area. The needed pins just push right in to the back of the existing factory connector and then it's a short run of wire to the driver's side wheel well. I have an extra...
  12. O

    Should I drive it or have it shipped?

    You could drive a $15k LC nearly as nice inside with 250k miles. Park it outside, plow through snow banks etc. you’ll have essentially the same repair costs with 75k mile LC as a 250k mile LC that’s been maintained. Also if you put 100k miles on a museum piece it’ll depreciate.
  13. O

    Should I drive it or have it shipped?

    Not sure I'd subject a $50k survivor to salted roads
  14. O

    What should this go for ?

    I'd try to stay under $20k since it'll need the timing belt work soon. It could sell in the mid 20's. Better deals on Facebook marketplace but requires patience. Edit: I'm adjusting my prediction down by $2k because the exterior condition could be better. On the bright side, less to worry...
  15. O

    Gold emblem package not gold anymore or am I losing it?

    Surprisingly it looks like all you need is small 2-12V DC power supply, a brush cathode and anode wand, and some "chrome stripping" and "gold plating solution" all of which appears to be available on amazon and reasonably priced! I might try it
Back
Top Bottom