Recent content by nickdz

Eric - can you recommend a good online distributer for ARB products? The typical online shops I have used over the years do not do a clean job an outlining ARB products. For example, I haven't seen the ARB Base Rack on them (at least the online stores I have used in the past).

Are the Prinsu awning mounts fairly quick to mount/unmount an awning? I have an ARB 2500 awning and am considering a Prinsu rack system. I am trying to understand if the Prinsu mounts support a quick mount/unmounting for awnings, or if they are more of a install and leave it on type mount. I...

The 3rd row holes are not drilled in the heritage edition. I have a heritage edition and recently installed a trekboxx system. The welded nuts are installed beneath the floor panel, but the holes are not drilled in the panel. It’s weird, I know. When I installed the trekboxx, I had to...

Can the anchor bolts for the ARB drawers use the existing four D-ring bolts holes in the rear cargo area, or do they have to use bolt locations from the removed 3rd row seats? The reason I ask is I have a 2020 Heritage Edition and do not have the 3rd row seats/hardware. I have the four...

For those who have a Heritage Edition, is there any feedback on the leather quality vs. the semi-aniline used in the base vehicle? It's my understanding that the Heritage Edition does not use semi-aniline leather. I assume it is a slightly lower grade, but I really have no idea what the impact...

Schnebly was closed from the West at I-17. The east side was open for 4 miles before being closed off. It was a bumpy 4 miles, but had great views. Soldier Pass was closed as well. Bit of a bummer...

Thanks everybody for the recommendations. We are going to run schnebly on the way into town and then Broken Arrow and/or Soldier Pass the next day. Looking forward to stretching the 200’s legs a bit and seeing some of the back country over here.

Any good trail recommendations near Sedona, AZ? We are going to be in the area for a full day later this week and are interested in finding a good trail to spend a few hours on. Mainly stock 200 with OEM spacers up front and duratracs (275/70R18). Not looking for anything extreme, but...

rs6tofj80 - can you recommend a good shop in Houston to get an alignment? I live near memorial and plan to upgrade to OME soon. Was going to use a local firestone shop, but figured if you would recommend any place.

Thanks texAZ. Much appreciated. With those torque values, I definitely need to pick up a breaker bar!

texAZ / turns earned - I'm about to install same spacers in my 2017. A couple of questions came up after reading this (and other) post, as well as scoping the job out yesterday. 1) using the approach noted above, did you guys have to remove the sway bar links? I only need to expose the top of...

NC237 - what software/manual do you use to get the images and instructions? I recently picked up a 2017 and am looking for a good service manual. I normally use alldatadiy website, but they don't have anything past 2015 model year.