Recent content by nestor

Hi all, Throwing some thoughts that I had these days about h151. During research of making 5th gear from 0.88 to something like 5th on h152 which is something like 0.76 if I remember correctly, all that I found is that a shaft must be swapped from h152 which need some more changes. But recently...

well, swapping auto to manual H151 with diffs on 4.1 ratio is not very good currently with auto and diffs 4.1 - I have ~2100 rpms when driving with 60 mph on 4th gear (A443) - tire size 31.6 when I swap to manual it will be around 2500~2600 when driving with 60 mph on 5th gear (H151) - tire size...

Better order h152 from Australia. There are some companies which makes tunning on h151 and h152 as well.

Thank you ikarus! My conclusion from the research was pointing the same part numbers for front and rear, but wanted to be sure before ordering. These 2 specs are from MTM - VX - 1fe-fz (1995 - 1998) LHD FZJ80L-GNMEKV FZJ80L-GCMEKV

I made research in amayama. I found lc80 with manual transmission spec 1fz-fe and I found 3 drive shafts available, so it realy depends what transfercase is matched with. Also they are different years, some starts from 1992 - 1998, otheres 1995 - 1998 and 1995 - 2006. However only 2 specs are...

I know that both need change. However I found the front drive shaft genuine in good condition. But why to spend money to change existing one working with auto transmission, instead I want to by the rear one and I need part number for that.

Hi guys, I'm on the route to make my swap from auto to manual H151. I have everything except the rear drive shaft. I know it should be longer than mine, but I don't want to extend current one, so I'm looking for the part number of the one for mtm. I'm with lx450 and transfer case HF2AV. Can you...

Looks like the correct one :). I will order it and will update once received. Thanks Joe :beer:

Still can't find the oem connector part number. There should be a company that still produce them.

This will be great!

Hi, I also have vertical play on my driver side. I'm with lx450. Need to mention that I bought a 3d file, not from Outsane, but with same model. Can you share how you fixed it?

Thank you ! I appreciate 🙏

This will work, but I want to keep it with same connector. For sure will make a new harness. If I can't find male connector I will replace it 😔

Hey, I'm trying to find out what number or where to buy such connector for auxiliary tank gadget. Here some pics as info Any help will be appreciated, thanks.

Thanks, will find out soon 🙂