Recent content by lipdogg

  1. L

    San Diego GX460 Mechanic Recommendations

    I highly recommend the "The Truck Shop". They're a Toyota/Lexus specialty shop that does all typical maintenance and are also experts in custom fab and aftermarket installs. James runs the shop and will take care of you. 8660 Miramar Rd Suite A, San Diego, CA 92126 If you're looking for a...
  2. L

    Replacing LCAs. What else?

    When I replaced my LCAs, I also replaced my CVs as the boots were toast, and had Marlin Crawler LCA gussets welded on - HD LCA Frame Brace, Lexus GX470 | Marlin Crawler, Inc. - https://www.marlincrawler.com/axles/frame/hd-lca-frame-brace-lexus-gx470 . Then obviously an alignment.
  3. L

    Help, I can't get my KDSS sway bar back on after lift

    I had a similar issue when installing my lift, if I'm understanding your issue correctly. I had to get a jack on the opposite side of the fixed kdss mount and lift the sway bar to drop the opposite side down until the disconnected side raises to the height needed to get it bolted back together.
  4. L

    Installed Android / Carplay interface into OEM system

    I want. Anyone buy and install this yet?
  5. L

    vibration - steering rack loose?

    That's awesome. Is the 200 series rack a direct swap to the 150 or is modification needed to make it fit using OEM spindles, LCA, UCAs (not RCLT)?
  6. L

    Lower Control Arms - Replacement

    I'm curious about these also. Price is great. I can't find a review on them anywhere!
  7. L

    Blackgate Customs - KDSS Control Harness

    Very easy install. Yes I did factory switch. No running of wires through firewall or anything. All wiring is done under the steering wheel. Took me an hour but that's because I got confused about something and was working in the dark.
  8. L

    Blackgate Customs - KDSS Control Harness

    I installed the Dr. Kdss control harness last night. Did a quick drive around and it definitely works. With kdss disabled going around turns you get a considerable amount of lean. Suspension feels much more forgiving. Highly recommended! I'm excited to test it off the street soon...
  9. L

    OEM Reman CV Axle Question

    Thanks for the replies. That's dumb they don't offer the LBJ separately. My LBJ boots look like they've seen better days, but I'll leave them as is until I replace the entire lower arm to get fresh bushings and ball joints. I ended up buying two CV's 43430-60082-84, new axle seals, new crush...
  10. L

    OEM Reman CV Axle Question

    I'm getting ready to tackle replacing my CVs this weekend. Are there any other parts I should replace while in there? I'm planning on replacing axle seals and lower ball joints. I have all main tools including the 35mm socket and seal puller. Any other tools or tips to make the job easier?
  11. L

    Need Help (Suggestions) for Ironman 4x4 FCP 2.5" Lifted Coilover Install.

    I had this same issue installing the ironman front coilovers a few days ago. Was such a bitch to get the bottom coilover bolt in. The video makes it look way too easy.
  12. L

    OEM Reman CV Axle Question

    Damn shots fired lol. Thanks for the info... Looks like I'll be going the OEM reman route.
  13. L

    2013 GX460 Radiator leak

    My radiator is also leaking (cracked) and I need a replacement. I found an aluminum radiator for similar cost to OEM replacement from "Winner Racing". They seem to have good reviews. Should I, or has anyone else taken the leap to try this radiator? I'm wondering if this would make sense to...
  14. L

    OEM Reman CV Axle Question

    My '16 has ~100k miles on it. I tore the boot because my pry bar slipped and slit the boot. during my suspension install. Now the grease in the boot will become contaminated and leak out. One can either pull the axle off and rebuild it with new boots and grease, or replace the axle all...
  15. L

    OEM Reman CV Axle Question

    Thanks for the pictures @Washingtontaco . I'm pretty sure these -84 PN reman axles came out not long ago. After some searching, it looks like Lexus and Toyota started requiring cores to be returned when purchasing brand new cv axles recently. This was to kick start their OEM reman cv axle...
Back
Top Bottom