Recent content by cruiser86

Very nice! Thanks 👍

Lekker bezig hoor! Keep it up 👍

I noticed your glow plug question in another thread and didn't want to hijack. Here is a link I used to read into the different options Toyota provided over the years and on different engines: https://forum.ih8mud.com/threads/which-plugs-should-i-be-running-b-2b-3b-h-and-2h-diesels.471567/ I...

We use this brand at work for "plastic" bearing bushings. They have various different specs and sizes. Don't know if it is available in your country but here is a link for a 16*18 in basi material spec...

Put the radio in yesterday, found a switched 24v in a loose plug somewhere under the dash. Decided to make for a neat installation it work within the timeframe that i had. Used a Victron transformer to step down to 12v. and some Wago connectors to connect to the existing speaker wires and ISO...

I have the Blaupunkt Hamburg sqm 23 dab at home ready to go in. Super cool stuff from Blaupunkt, will share a picture once done. Just need to find a power source as the plug dangling behind the hole in the dash doesn't have one 🤷‍♂️

Is the bulb seating (making contact) correctly in the housing? Had this issue on an other vehicle. Wiggeling didn't work for me in that case either. Other thing that once worked, shoved an extra ground wire in the housing.

This guy does a complete frame repair on YouTube, maybe you pick up some interesting stuff. He is also active on the forum. https://www.youtube.com/@wrenching.lifestyle/videos

Nice! watched it on YouTube last night 👍

That was indeed a special fuel hose. Pulled the data from the online order. It states specifically that it is rated for diesel fuel oil. Engine and engine bay is dry on the fuel side.

Was stranded at work yesterday. Made it 500 meters to the nearest garage. Couldn't get (presumably) the system bled. It kept dragging air in I suppose or it is not able to let fuel pass. Replaced one of the 3 month old flexible hoses on the spot. Wasn't looking the best 🤷‍♂️ After replacing...

Thanks everybody for the input. @duncanrm , I have seen the video & was wondering if the cam follower could let air pass trough into the block and if it could get stuck-ish and prevent the bleeder from working. A new one must arrive from Japan, i could ask locally to see if anybody has a spare...

Will try to clean the inside of the banjo bolt where the bleed nipple seats. Today when I wanted to leave work same problems as before; air in the system. I couldn’t get the air out with the primer pump, same as previous times (every time it has been quite troublesome to get diesel back at the...

Followed this one earlier 👍 replaced all washers with own from Amayama. It is def coming from the bleed nipple. Fixed it for now with Loctite 55. Thanks for the input, much appreciated.

Been chasing air in the fuel system for quite some time. Today I installed a new (original) bleed nipple since I noticed the old one was sweating a bit. With the new bleed nipple it leaks even more. Unfortunately part number 23319-48010 is no longer available. Are there tricks to seal the bleed...