Recent content by benji100

  1. benji100

    Definitive list of AHC maintenance items

    uHu, that's on me, it's -.5 and I can't adjust it further up. New springs, spacers, fluid/accumilators, and new Oem sensor. Just don't get it.
  2. benji100

    Definitive list of AHC maintenance items

    Indro, Grateful for the note back. -At N, my hub to fender is exactly the same at all corners = 22" ( My wheels poke, so actual number is less) -I have a Prinsu roofrack and a wooden drawer system made by the previous owner. However, my spare tire is currently off as I'm replacing the rusted...
  3. benji100

    Definitive list of AHC maintenance items

    Hi all, Sorry for additional follow up but I'm trying to decide how deep I go into investing in my AHC. (Well, more than I already have) I started on the rear and installed King springs, spacers, and purchased a new OEM lift sensor. Installed and adjusted the sensor to the highest level...
  4. benji100

    Definitive list of AHC maintenance items

    Beyond helpful @uHu & @IndroCruise. I did pull both sensor units and test for resistence / coniuity. All tested well but to Indro's point, I guess that doesn't mean the sensors aren't faulty. Good news: I did adjust the sensors enough to get AHC cycling and working correctly. My sensor...
  5. benji100

    Definitive list of AHC maintenance items

    Hi all, Needing a little help with some AHC issues on my 06' LX. A little backstory incase that helps AND thank you all for the time!! AHC was working perfectly fine, the car had aftermarket wheels/tires. (Roughly 32") I purchased new wheels/tires that are slightly larger, just shy of 33"...
  6. benji100

    For those with torsion bar questions

    Hi all, OP - incredibly helpful, thank you! I was able to get an extra 5(ish) worth of teeth on the reindex. Mine still has AHC, so I'm making the adjustments in efforts to lower front pressures. I've cranked at the bolt for a while and have a long ways to go but before I went any further...
  7. benji100

    Front Axle Hub Damage

    Gents/Ladies, Doing a front brake/bearing service and used a standard punch instead of a brass to remove the bearing shoe. (I'm an idiot, I know) Is the hub toast? Many thanks in advance! Is the hub toast? Many thanks in advance!
  8. benji100

    Permanent TPMS Delete DIY w/ Pics - 06/07 LC/LX470

    My man! And just feed both lines through, snug the metal tab down and good to go?
  9. benji100

    Permanent TPMS Delete DIY w/ Pics - 06/07 LC/LX470

    A little bit of an electrical noob here. I picked up some red t taps and it looks like only one wire can pass through but pictures posted seem to show that both wires pass through the t tap. Any insight is greatly appreciated!
  10. benji100

    LX 470 Driver Side Door - No Audio

    Hi all! Apologies in advance as I know this topic has been discussed in detail but I wasn't able to locate anything specific to my issue. I have 0 audio coming through the front driver side door, all other speakers and etc. seem to be working. Previous owner did install a Tesla style...
Back
Top Bottom