Hey
Jon,
Looking for a test procedure for the 3FE igniter with nothing noted in the FSM. Any Advice? Is it a case of everything else tests okay so change the igniter.
Also, what is your experience with the failure rate of the ignition module inside the distributor?
It tests okay but just...
I have the same radio and mounted on the frot edge of the centre console using velcro. It's comfortable to use and remove to lock away. I have a Diamond super gainer antenna to go along with the rig.
I'm in Canada and still have the original Japanese glass lens installed. When I bought the truck, the beam alignment was very noticeable to the left when tested on the garage door so I adjusted them as far to the right as possible and that helped a lot. While there are still some artifacts of...
91 JDM triple locked VX Wagon. Four wheel disc brakes with rear rotors smaller than anything ever sold by Toyota in NA. I had to order Toyota replacements from Japan $$
I have harvested the brass battery terminals from German cars at the scrap yard. They are simply superb quality in my opinion. The fastener mechanism is durable and very tight on the battery post and will not deform the terminal clamp. Also BMW sedans have the battery in the trunk with about...
I'm in Canada too and have used Amayama and others. However the best price and service is from Japan 4x4. stedman@japan4x4.com
Dave is a Canadian fellow living in Japan operating an import/export operation. After conversion most parts are way less expensive than North America and many as low as...
Cruising around Canada during the past few weeks and couldn't pass it by. 11000kms round trip and burned 1/2 litre of oil! 91 3FE and endless fill ups. Thelma drove like she thought she was born a Lexus
I did my 3FE desmog and its been running like the tractor engine it is for about 12k miles. No VSVs installed and really does run perfectly smooth. I suggest that you use a propane bottle with a length of vacuum hose to find the vacuum leak that I believe you may have. Turn the bottle on a...
I looked high and low for a 3FE adapter plate and came up empty. That why I decided to go ahead with the tranny rebuild myself. The nomad valve body is pricey for sure but considering the only gaskets available are from China I decided to take the leap and buy the Nomad. Honestly the best...