I have a broken 74 engine, might have the water pump, is that early enough?
Arizona Classifieds / For Sale / Wanted (18 Viewers)
- Thread starter blatant
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Mattman
SILVER Star
I need a stock headlamp assembly if anyone has one. Mine took a stone through it 
1995 80 Series, right side. Thanks!
1995 80 Series, right side. Thanks!
LX450 wheels in Camp Verde, not mine. Found on FB marketplace, $200 for 4:
Look at this post on Facebook Log into Facebook - https://www.facebook.com/share/HyLY89vq6MkiXZse/?mibextid=79PoIi
Look at this post on Facebook Log into Facebook - https://www.facebook.com/share/HyLY89vq6MkiXZse/?mibextid=79PoIi
Nifski
SILVER Star
1964 FJ 40 Project/part out.
This is a very cool project that I had a local shop building that I can sell whole or will be parting out. It is a Tucson truck that has had all the body work completed and is ready for paint. All parts have been acquired to complete the truck.
1.Complete perfect Tub with all original body pieces, Powder coated frame.
2.New Army green OCD FST top ( never installed) and OEM bows. Have pair of complete soft doors with all hardware.
3.New rebuilt 2FE motor with modified 80 series wiring harness and new complete Coolerman Wiring Harness to replace original truck harness.
4.Orange 44/ George rebuilt front disc brake axle and full float rear
5.OEM rims and new tires
6. New OEM H55 5 speed
7. All gauges, emblems, hood spear etc..
8. FJ 60 power steering unit, frame has been set up for this upgrade.
9.All original seats.
10. NIB OEM Darth Vader light!
I will be getting the Truck back from Higgy's after the first of the year and will have all the other parts from storage back at my house around the first. Hit me up if you are interested in the complete project and I can meet over the holidays, If you are interested in certain parts send me a PM and I will contact you when I have a price list and pictures. Posting this as a heads up for the local crowd. Like many, I have horded a great stash of rare parts which will all be up for sale soon.
Best, Russ
This is a very cool project that I had a local shop building that I can sell whole or will be parting out. It is a Tucson truck that has had all the body work completed and is ready for paint. All parts have been acquired to complete the truck.
1.Complete perfect Tub with all original body pieces, Powder coated frame.
2.New Army green OCD FST top ( never installed) and OEM bows. Have pair of complete soft doors with all hardware.
3.New rebuilt 2FE motor with modified 80 series wiring harness and new complete Coolerman Wiring Harness to replace original truck harness.
4.Orange 44/ George rebuilt front disc brake axle and full float rear
5.OEM rims and new tires
6. New OEM H55 5 speed
7. All gauges, emblems, hood spear etc..
8. FJ 60 power steering unit, frame has been set up for this upgrade.
9.All original seats.
10. NIB OEM Darth Vader light!
I will be getting the Truck back from Higgy's after the first of the year and will have all the other parts from storage back at my house around the first. Hit me up if you are interested in the complete project and I can meet over the holidays, If you are interested in certain parts send me a PM and I will contact you when I have a price list and pictures. Posting this as a heads up for the local crowd. Like many, I have horded a great stash of rare parts which will all be up for sale soon.
Best, Russ
This is exciting stuff!
The Vader light will be the most valuable part on the list!
I posted this over in the General forum, but thought I would post it here too, I am selling my 4.7 Trd supercharger kit. I’m in Gilbert.
I cannot make the Facebook link work.
$6k less the customary CSC discount.
It was removed from a low mileage, well cared for 2001 tundra 2WD.
Opinions very widely, but figure around +100 hp.
It pulls very hard through the mid rpm range and makes the cool supercharger noises.
This will make a huge difference hauling heavy loads and towing.
Kit comes with complete Unichip setup to provide more flexibility and control of the tune, also includes the flux2 controller which reads OBD2 and tune data along with fuel map settings.
Flux2 info:
UNICHIP FLUX2 IN CAR DISPLAY going in my tundra - https://www.tundrasolutions.com/threads/unichip-flux2-in-car-display-going-in-my-tundra.123175/
Includes all the parts and pieces necessary to install in your tundra, Sequoia or 100 series Land Cruiser.
With the Unichip setup this might fit the 4.7 4runner as well.
The Toyota OEM install instructions are readily available on the internet.
Kit includes a new set of oem spark plugs and knock sensors.
The kit uses your factory injectors, factory spark plugs, and factory fuel rails.
I think this kit does not use the 10th injector, but the 9th and 10th injectors and mounting bracket with regulator are included.
Interesting trades NOT considered. #rungood
I cannot make the Facebook link work.
$6k less the customary CSC discount.
It was removed from a low mileage, well cared for 2001 tundra 2WD.
Opinions very widely, but figure around +100 hp.
It pulls very hard through the mid rpm range and makes the cool supercharger noises.
This will make a huge difference hauling heavy loads and towing.
Kit comes with complete Unichip setup to provide more flexibility and control of the tune, also includes the flux2 controller which reads OBD2 and tune data along with fuel map settings.
Flux2 info:
UNICHIP FLUX2 IN CAR DISPLAY going in my tundra - https://www.tundrasolutions.com/threads/unichip-flux2-in-car-display-going-in-my-tundra.123175/
Includes all the parts and pieces necessary to install in your tundra, Sequoia or 100 series Land Cruiser.
With the Unichip setup this might fit the 4.7 4runner as well.
The Toyota OEM install instructions are readily available on the internet.
Kit includes a new set of oem spark plugs and knock sensors.
The kit uses your factory injectors, factory spark plugs, and factory fuel rails.
I think this kit does not use the 10th injector, but the 9th and 10th injectors and mounting bracket with regulator are included.
Interesting trades NOT considered. #rungood
Last edited:
- Thread starter
- #6,328
It looks like 81010-60072 is the passenger side headlight and 81050 is the driver side. I need the passenger side. Are they glass? If so pm me a price if you don’t mind. Thank you!
I have a set if you still need them.
Last edited:
Amazon mix up and my F.I.L and M.I.L both separately and individually bought me the same Jerry can holder. I have this one and one identical to it still in the box brand new. They are $39 new on Amazon.
Comes with a lock and meant for the older style steal cans. $35
Comes with a lock and meant for the older style steal cans. $35
Looking for a good home. Our lawn was/is too thick for an electric mower. $100
Not the actual picture but can get some if you want. Also has the clipping catch bag as well.
Not the actual picture but can get some if you want. Also has the clipping catch bag as well.
13ft Grumman canoe it will come with oars, life jackets, etc. These small Grummans are hard to find. It took me almost a year to locate this one. This is a nice little canoe easily carried and loaded on an LC's roof by one person. $500 obo.
Last edited:
Nifski
SILVER Star
Complete 1977,FJ40 hardtop. Front Doors, Rear doors, Side panels, very clean minimal rust, Arizona truck.
See main classifieds parts forum in Body parts for pictures and pricing.
See main classifieds parts forum in Body parts for pictures and pricing.
Nifski
SILVER Star
Pictures and more info now in 40 series main for sale forum
