I have a Warn XD9000i, a 91 HDJ81 antenna switch, and the slee wiring relays.
The wiring relays have 5 wires, the warn winch had a 5 pin remote.
I've looked at the wiring diagram from slee for the relay board.
I've looked at the wires coming from the remote bulkhead on the solenoid control box of the winch.
Using a diagram of the warn long probe, I jumped the ground loop, and sorted out the power for winch in and winch out.
I ran the relay wires into the control box, and began connecting.
I got down to the last wire (red) which ran from the bulk head out of the control box to a ground point on the underside of the winch body. I stripped a piece of that wire, and when I touched my relay wire to it, it powered the winch to reel out.
is there something I'm missing here?
I've seen how to wire in a 3 wire control switch. But the 5 wire relay board is specifically so that both buttons on the re-purposed antenna switch, if pressed at the same time, won't activate the winch in and winch out.
Has anyone hardwired the slee in cab winch control directly into an XD9000i solenoid control box?
The wiring relays have 5 wires, the warn winch had a 5 pin remote.
I've looked at the wiring diagram from slee for the relay board.
I've looked at the wires coming from the remote bulkhead on the solenoid control box of the winch.
Using a diagram of the warn long probe, I jumped the ground loop, and sorted out the power for winch in and winch out.
I ran the relay wires into the control box, and began connecting.
I got down to the last wire (red) which ran from the bulk head out of the control box to a ground point on the underside of the winch body. I stripped a piece of that wire, and when I touched my relay wire to it, it powered the winch to reel out.
is there something I'm missing here?
I've seen how to wire in a 3 wire control switch. But the 5 wire relay board is specifically so that both buttons on the re-purposed antenna switch, if pressed at the same time, won't activate the winch in and winch out.
Has anyone hardwired the slee in cab winch control directly into an XD9000i solenoid control box?