Back to 80s stuff:
Trail Taylor skid plates?
What Did You Do with Your 80 This Weekend? (89 Viewers)
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Yup the creeper skid. My sliders make most other skids incompatible with where the u bolts wrap the frame so needed something that matched a similar profile to the factory crossmember. Plus this thing is very robust.
What lies lurking…..
You know the 80 crowd Beno - - now you have everyone running out to check their ear quarter panels and adding it to the list just below checking the HG and PHH every month just to be sure everything is still ok.
You know the 80 crowd Beno - - now you have everyone running out to check their ear quarter panels and adding it to the list just below checking the HG and PHH every month just to be sure everything is still ok.
Well, if the frames are toast, there are 2 left of each side in the US.
62705-60010
62706-60010
They will end up in the Discontinued Parts thread in the near future, I'm sure. I was surprised they were still available for ordering. Luckily for this client, they were.
Attending the Lone Star Land Cruiser Round Up at Katemcy Rocks Offroad park in Mason, TX
I got the rear heater bypass done on my 1HZ. Was leaking at a connection under driver side(right side) of truck. Line rusted out.
Removed the old bushings from the control arms, panhards, radius arms etc. Five minutes in and the pump on my press decided to take a crap.
So I had to do it like a caveman, knocked the rubber out with a BFH, scored the metal bushing with a hacksaw and chiseled it out. Took me about 1,5h for all 18 of them, but at least it's done.
So I had to do it like a caveman, knocked the rubber out with a BFH, scored the metal bushing with a hacksaw and chiseled it out. Took me about 1,5h for all 18 of them, but at least it's done.
kelly saad
Supporting Vendor
Finally. A few hours working on my own stuff. Engine installed. In 3 more years, maybe I will have it running. No, the strap didn't break, and yes I know that was a bad idea.
Mounted new tires
Went to Sand Hollow near Hurricane Utah. LOVE the southwest.
Fj80oregon
GOLD Star
Picked up another one! Going to sell the tranny 94 442.
Added some new oem side moldings
Fj80oregon
GOLD Star
And on the 1/4 ton setting! You crazy and I like it nice work!!
Are you running spacers with those wheels?
kelly saad
Supporting Vendor
Ummm, yes. I wasn’t going to mention the 1/4 ton setting that was almost bending the end of the arm. Haha! This is a restoration shop, we don’t have chains and stuff.
Info?
