Things are slowly coming along. I went out on a trail a few weekends ago with a club up in Northern CO called Horsetooth 4 Wheelers. Good guys there in the club, had a good time, and built a little more confidence in the rig. It did really well, the biggest problem that I had was the radio came flying out over a bump, I'm not complaining if that's it.
Right now I ordered a new wiring harness for the lights, and need to install it. I am also still having Power steering fluid leaking. I am pretty sure it's coming from the main shaft out the front, hitting the belts/pulley and spewing fluid everywhere. I am pretty much set on the Saginaw conversion. I contacted OrangFJ45 on here for the brackets he is doing up for them, but still need to figure out what pump to buy, and where from.
The Tac is going wack as well, kind of a strange inconsistent problem. Sometime when I turn the key on, it is just pegged all the way out at what might be 6K or so... Then it will act normal, then just run abotu 1k above what I'm running, all sorts of crazy.
Any ideas???
I am still working on the interior, picked up some cloth, need to figure out what to do with the door panels, and locate a sewing machine...
Right now I ordered a new wiring harness for the lights, and need to install it. I am also still having Power steering fluid leaking. I am pretty sure it's coming from the main shaft out the front, hitting the belts/pulley and spewing fluid everywhere. I am pretty much set on the Saginaw conversion. I contacted OrangFJ45 on here for the brackets he is doing up for them, but still need to figure out what pump to buy, and where from.
The Tac is going wack as well, kind of a strange inconsistent problem. Sometime when I turn the key on, it is just pegged all the way out at what might be 6K or so... Then it will act normal, then just run abotu 1k above what I'm running, all sorts of crazy.
Any ideas???
I am still working on the interior, picked up some cloth, need to figure out what to do with the door panels, and locate a sewing machine...