Installed PDI airbox together with the PDI cross over delete. I had to cut the fender a bit as the airbox inlet is too big. Next is the stainless snorkel.
Driving the heck out of it now that it’s running like it should. Next I need to drain and fill the PS, Brake, Diffs, Transfer case, transmission, and coolant. Then do the front crank seal and oil pump seal.
Replaced the master window switch trim. This one was sourced from Aus for a pretty penny since the usual Middle East sources didn't have stock. The original had it's lifespan stretched a bit with zip ties, and glue, but it finally bit the dust...
Got both axles and all linkage pulled. Used the @TRAIL TAILOR press dies to get all bushings out.
Worth EVERY SINGLE PENNY to have the correct dies.
Getting everything ready for sandblast, then doing blitz black on everything with an epoxy...
Swapped the old antenna to a fixed version and installed the ASB100 in preparation for a winch while retrofitting the cabin air filters. Hoping this cuts down the amount of dust throughout.
Got the 40 gallon tank installed with new fuel...
Took a trip through part of the eastern Mojave Road and Death Valley.
More Joshua Trees than in JTNP...by far
Hid out at Death Valley Mine because it looked like rain. Then, snow happened. In April. WTF?
Met a buddy (not @Dan2722 , but...
Installed ARB compressor and 9100, doing a little work each evening for the past couple of weeks. I used the Slee 2nd battery tray for the SaftyHub 150, and a leftover piece of aluminum from another mounting kit, to mount the junction box for...
Got a bit carried away while adding "a few" tie down points to my drawers. I ended up also replacing the piano hinges I had used for euro cabinet hinges and sprayed the top with 2K Raptor Liner. Just finished putting this all back together today...
Installed some new lights using Ben3D printed bracket. Super easy to install, and anything electrical I struggle with lol. Going to take some more pictures here soon
Had my Coastal Off-road bumper welded up a couple months ago and got out for some early spring wheeling.
Got a little cocky on the snowy rocks and high centred myself with the wheels spinning in the slush. Had to get pulled out by my friend in...
Pulled out the transfer case. Getting ready to play with 111 lbs. of fun!
Did it in the drivrway. No easy task. I have probaby done over 1000 sit ups over the past week!
Installed a new head unit and backup camera. I sacrificed the OEM cigarette lighter and subbed in a USB charger/connection to the Sony.
I also got some WT mats for first and second row. I actually ordered these before I even got it home...
Got the gauges wired up! Now just need to finish the turbo install and get this thing boosting. Also finished up the exhaust. Still need to heat wrap it once it’s tested for leaks.