York Compressor - Buying More

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Nov 11, 2007
Threads
150
Messages
913
Location
Nashville, TN
Seeing as how everyone is ramping up with their OBA installs with Joey and the GLWJ bracket, I'm assuming there will be a need for more compressors. I'm going to start actively going out and getting them for you guys again. Cost will be $65 + Shipping. You can estimate shipping by 25lbs from 90401.

The units I get are 10ci (the big one), made by York or CCI (who bought rights to the York design). These would NOT be reconditioned or anything, but I would ensure they worked according to the following tests:

1. Making sure the pulley spins freely when clutch is disengaged.

2. Ensure clutch engagement by hooking up power to the compressor and making sure the clutch locks properly.

3. Ensure proper compressor operation by turning pulley with clutch locked and ensure it pushes/sucks air and rotates properly.

I can't make any promises on delivery date, as I haven't been to my source in quite a while. I'll go and get as many as I can this weekend.

THE CURRENT LIST
All... I currently have one of these available and ready to ship. Let me know if you are interested. First PM gets it. $60 + shipping.



PS - if you need someone to vouch for me, I've sold about 10 of these or so already, and NLXTACY (Joey) bought one from me face-to-face.

Also helpful is a link to my OBA buildup: https://forum.ih8mud.com/80-series-tech/208201-project-onboard-air-york-compressor.html

AND

A link to the York service manual: http://ccicompressor.com/docs/tccisrvice.pdf
 
Last edited:
:princess: is currently out of house - please add me to your list
Rob M Norwich, VT
 
Now if only that other slacker thread would get on the ball and hurry up with the brackets and pulley....






er








wait...... :D
 
Last edited:
waiting on the new shipment for mine I guess... :(

Or-

Will you contact us when the new ones are in or do we just send in the paypal?

v/r,

Bill
 
hey phil did you ever get that filter in line with the rest of the setup?
 
hey phil did you ever get that filter in line with the rest of the setup?

Not yet - it's sitting in my garage. Trying to finish the engine swap on my Volvo before the LC gets any more attention lol :D

waiting on the new shipment for mine I guess... :(

Or-

Will you contact us when the new ones are in or do we just send in the paypal?

v/r,

Bill

I'll add you to the list and contact you when I get them. Don't worry about PP'ing me yet. I may go this weekend or the weekend after next... just busy right now. I will get them for you guys though!

-Phil
 
yeah its pretty big. There were a few rumblings about cracking way back when on the original bracket. We just dont want those same issues again. We seriously tried to solve every issue we knew about.
 
I started taking mine apart today (no real reason to do it, I just wanted to see how it worked inside :D). Looks pretty simple and overbuilt, kinda like a cruiser! I remember hearing that NAPA has the reseal kits with all the gaskets; does anyone have a part number for it?
 
Yeah they are very well built. Design hasn't changed since the 70's or so. I believe you can get rebuilds kits directly from the manufacturer... try ccicompressor.com... no doubt they could direct you to someone who does.

-Phil
 
Phil,

I'm eventually going to need a York but I haven't checked on local availability. If I can't find anything within a reasonable distance I'll take the hit on shipping and join your list.

Off-topic, but I checked out your Volvo build--looks great! Sure is an early 244. Why no B230FT? :D That's a clean looking 850 Turbo setting in the driveway, too. '94?

I've noticed several other past/current Volvo owners here. I think "the Volvo obsession" is similar to the Cruiser obsession: a common appreciation for the longevity designed into these vehicles.

To get back on topic, didn't many of the older Volvos use Yorks, or am I thinking of Benz?
 
Phil,

I'm eventually going to need a York but I haven't checked on local availability. If I can't find anything within a reasonable distance I'll take the hit on shipping and join your list.

Off-topic, but I checked out your Volvo build--looks great! Sure is an early 244. Why no B230FT? :D That's a clean looking 850 Turbo setting in the driveway, too. '94?

I've noticed several other past/current Volvo owners here. I think "the Volvo obsession" is similar to the Cruiser obsession: a common appreciation for the longevity designed into these vehicles.

To get back on topic, didn't many of the older Volvos use Yorks, or am I thinking of Benz?

Thanks for checking out the Volvo build! I would have gone with the B230FT, but the car is going to be a daily driver/commuter, so I need to get high mileage (the main reason I pulled the B20/K-Jet motor out). The B230/M46 should get me around 25-30MPG hwy with a few tweaks. The B20 is eventually going to get rebuilt and souped up for installation in my next project, which I HOPE to be either a 120 or 242 - but that's in a few years when I get my own garage!

That is my brother's '94 850 Turbo - a fun car to drive but I've noticed the FWD Volvos have not been as reliable as our RWD cars. It is running good now and a blast to drive.

I'm attracted to Volvo for the same reason I'm attracted to Land Cruisers: the way they are designed and engineered to last FOREVER, with the added bonus of being easy to work on and extremely durable. I can't tell you how many 200K + cars I get parts out of - and the only reason they are in the junkyard is because they were totaled saving their owners!

If you are really into Volvos and Volvo Performance, check out davebarton.com - I just came across this the other night and the guy has SO MUCH info on his page as well as some really cool products and links.

In regards to where to get a YORK - 70's Mercedes cars have them, but they use the Roto-lock connectors, which are not well suited to how we are using them. Pre '85 Volvo 240's is where I pull ALL of mine from, as they have the flange adaptors that are easily replaced or retrofitted to work with air systems. That is really what got me into the Volvo obsession, just noticing how well built the 240's were while I was pulling the compressors from. I decided I had to have one because they were so cool and well engineered.

-Phil
 
I'd like to be on the list for a compressor...I'll send the email as well.

Thanks!
 
There were 4 more York kits that were just made available. Three are spoken for which means there is one still available to sell. So Phil, I'm sure you will be getting some more inquiries.
 
Hey, one's useless without the other. If I'm dropping the money on the bracket, I should be able to afford the pump as well!
 
Back
Top Bottom