What is this?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

The orange one is definitely a south / middle American import. You can tell by rubber bumpers on the bumper , and not heater. Also, the rear axle is not Toyota.
 
The orange one is definitely a south / middle American import. You can tell by rubber bumpers on the bumper , and not heater. Also, the rear axle is not Toyota.
Wow! You guys know your stuff! If you don't mind me asking, when you look at the photos, how do you know the rear axle isn't original?
 
See the difference.

Dana

Dana.webp


Toyota FJ40

Toy axle.webp
 
welcome @Asaszn

All 3 of these should be setting off red flags for various reasons. Unfortunately, 90% of the cruiser that you will see for sale online have had poor quality cosmetic only "restorations". I would want to know what is under the paint and alum. diamond plate.
 
This is your first Cruiser. I would suggest you keep your eyes open for trucks offered by members on the forum. You're learning. Buying a Land Cruiser that is a fair deal is as much about "who" you're buying it from as it is about the truck itself. Honest sellers will tell you what the truck needs and hopefully set the right expectation. Modifications by previous owners can be great or an expensive nightmare to correct IF you can even figure out how. And just for fun take a look at the following thread - FJ40 For Sale Ads - Observations & Translations!
 
This is your first Cruiser. I would suggest you keep your eyes open for trucks offered by members on the forum. You're learning. Buying a Land Cruiser that is a fair deal is as much about "who" you're buying it from as it is about the truck itself. Honest sellers will tell you what the truck needs and hopefully set the right expectation. Modifications by previous owners can be great or an expensive nightmare to correct IF you can even figure out how. And just for fun take a look at the following thread - FJ40 For Sale Ads - Observations & Translations!

Again, I appreciate your advice. To act on that advice I posted up in the classifieds section what I'm looking for and maybe I can find someone on this site. I also took your recommendation and read through your post about for sale ads (very amusing). I went back through the for sale section of this site and to be honest, I see many of your quotes in those ads so it makes me wonder how different the folks are who are listing here compared to those posting on FB/CL/Etc. I know there is a massive differance between a random member and someone who is respected in the community like yourself. I'm just saying that there is some shady stuff that is lurking in the classifieds here too.
 
Modifications by previous owners can be great or an expensive nightmare to correct IF you can even figure out how.


Could be the most truthful statement on the internet.
 
seen the red one before.... and the green one... the orange does look like a south of the boarder imported cruiser (which usually means mechanically not so good)

red one screams I am an 80's show truck lol


Shouldn't the green 79 have the rear pop out windows on the side?

Not sure what he means either by the expertly fabricated tub?

the green one i know the builder of the rear part of the tub... 3/16" steel ... 1/8” floors ... Wally Moses made the rear

I think that green one had side steps/sliders bolted to the rockers... he must have removed them for the running boards ... Wally did the rear tub... not the rest afaik most of his customers opt to do the paint and final assembly ... he is a fabrication wizard
 
Looks like the correct windshield hinges? If your talking about the bracket bolted on the front of the hinge I think he had lights mounted to them

I was pointing out the rear tub ... the rest of what a PO did I really have no clue :)
 
The only time it matters whether all your parts are Toyota is if you want a complete stock Toyota. If you're looking
at V-8s and saginaw steering you're probably more concerned with driving something that is enjoyable to drive within
your personal needs. It's not about the modifications so much as who did them. If I was to build a 40 or 60 knowing I would always travel alone to very rough, out of the way places, I would replace my Toyota axles with a 35 spline Dana 60 front and a 35 spline Dana 60
or GM 14bolt rear. A completely stock 40 is fun to drive in the way a 1972 Triumpf TR6 is. It's not made to do coast to coast at 75mph
and leave the driver fresh and rested at the end of a 12 hour run. Considering a ground up resto will cost you well over 25,000
doing most the work yourself, these aren't too expensive if they're done right. The cheapest paint job I've been quoted, delivering the disassembled body parts to the shop, is 6500.00. Factor in the disassembly and re assembly and paint is near 10 grand.
Decide what you want to do with the truck and buy or build appropriately. If it's not stock, look at the parts. Gearing and strength
is important if off road is in the future. If all you ever want to do is mud drags do a V-8, TH400 to a NP 205 transfer with a Dana 60 rear.
I wouldn't necessarily want to rock crawl with that combination. I personally don't like the USA 3 and 4 speed. The gearing is too high for relaxed wheeling although with an orion 4:1 t-case you can overlook the inadequacies of the stock trans. Get together with a local
cruiser nut and lay out what your needs are then find or build the truck of your dreams. There's way too many options
 
Back
Top Bottom