What have you done to your 100 Series this week? (65 Viewers)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

My white 100 series engine need to be rebilled because the block is broken
It has 1fz-fe
٢٠١٥٠٢٢٥_١٤٤٥٥٢.jpg
٢٠١٥٠٥٠٧_١٢١٩٤٧.jpg

And my black 100 series with 1fz-fe engine with maunl transmission with huge turbo charge 850+hp need to be re tuned the motec ecu
٢٠١٥٠٢٢٥_١٤٤٣٥٢.jpg
 
Installed the pfran led kit. These lights are almost too bright! I blinded myself many times during the installation [emoji23]

Also installed a dual usb charger in the stock cigarette lighter location.

ImageUploadedByTapatalk1454596541.279303.jpg



Sent from my iPhone
 
used some self adhesive 3/16" felt on the console lid to take out the 'wobble'. nice and snug now.
 
Just has it towed to ACC for starter replacement and T's...
 
I've got a loud, vibrating rattle when sitting at stop lights/signs and it's in gear. This should fix it.
Same here, you think it's the engine cover? Man I wish I could get my engine bay looking that nice...
 
Same here, you think it's the engine cover? Man I wish I could get my engine bay looking that nice...

Thanks, it's all from the PO though, I haven't washed it since I got it lol.

I believe that's the source of the rattle. I found a couple of comments about some foam deteriorating and causing it. Forgot to look earlier, but went back and took a couple pics. There's 3 pieces of it underneath. Those comments/threads on it stated that even when the foam was replaced, it still rattled.



 
Last edited:
If y
Thanks, it's all from the PO though, I haven't washed it since I got it lol.

I believe that's the source of the rattle. I found a couple of comments about some foam deteriorating and causing it. Forgot to look earlier, but went back and took a couple pics. There's 3 pieces of it underneath. Those comments/threads on it stated that even when the foam was replaced, it still rattled.





I had exact same issue. Mine was missing foam right below oil fill hole. I used to put the truck in neutral at stop lights to prevent the noise. I have since glued a small piece of foam to that area and it 100% eliminated the rattle.
 
What do you guys clean your engines with?

Sent from my HTCONE

Wish I could tell ya. I spent the weekend 'wheeling. Met a friend at his detail shop - we went to a meeting, then lunch. He said "I'll drive. Leave your keys - you're blocking Tom's car".

Left it like this...
Screen%20Shot%202015-09-08%20at%2011.44.37%20PM.png


picked it up like this...
IMG_8906.jpg


The guys did the carpets, engine, exterior...
I didn't even notice the engine bay (which was a nice monochromatic tan before this) for several days. I'd have asked what they used.
 
Same for me, PO took it to a detail shop before the purchase.

I was putting it in N when stopped too, but it wasn't rattling all the time either. Past few days it had been getting out of hand.
 
Same for me, PO took it to a detail shop before the purchase.

I was putting it in N when stopped too, but it wasn't rattling all the time either. Past few days it had been getting out of hand.

Are you sure it is the engine cover? Maybe the cat shield.
 
Are you sure it is the engine cover? Maybe the cat shield.

99.5%. The noise came from up high and directly in front of the dashboard when it was happening. With the other threads and MUDr's chiming in, I expect that's the culprit. It didn't happen today while running errands, but if it starts again, I'll check that out.
 
Refoamed all the midwoofers of the OEM Mark Levinson system to join the refoamed subwoofer.

NJ_oP3S7f_DxzL0QjIsI11jVyGudEbAkjKfnGvYGw4siSknuWaCtjy_ANQwlZojSsZM10j3Dmk6WRgs2p8tqh8HhKD9EGE3xNB2RDAALSZCHqlVIW2deYW0aJpXVHfliicUE8ZY9Sbds6THU9B0LSiWGJE4mYX5DcIk-kHpB3Jmpu5Wrmsx82Bm33BiN3aRDv_i3Gk0C82c-3vb1wvI4xt0ARAbIW5yXRhDBIRst8IOqXWavO8tfK4zqXoAcsj6Lcdq3exHSPh3MYvkeOImOr-2hIrtOIda_XXj4TV-zTzhwqUtftokDITP45MbzdKW0exnrZNJ1krpj_3ndzkxBB3wbtr6BUPZinA5XbjV9pWxpr3m0G2qkLpiGkEaxQgoDK64ycgjNxl5RYx3GVV9-4Gn6otKx_eV2yjnobfgXEU7z58SLfvQ_-qPSpl7oap43s36Y4OJPRr5cUqGwlf3SibMdLIZEEZzIxOXO0IAY_V0y5icfsB3huM0Fcmwkzm90GdkribheriIzN4To1DPaUU336kW_xcgCTjz0vZzVTgKxoOBUSFFhzuF_jFNDaqhpUg7e3A=w708-h1257


Finished painting 2014 Tundra SR5 alloys. Mounting next week after the paint cures.

5O_uGylSMs4axSKnxCF77a8kr1u-9jwZY75DrhAzh4FOSHgF5gxtV_0-MQkHPTZpr5igc0gDK848YJLPigmys0p9TYjgY5u2vJ18Qqvp2TKj-EcM83wy8_LwwFBOq6Rer-RwxsGh9Lmxbl544youCod-WFIiKMt23KVVX4OAjWjcMJR9dkClvUnl6J8yhQpDFyg775cqEW0chERRSqXaYEyNNPpxwJQ1j0hgfbF8B9S2lYqgQBHSBra04y3tpSc5CMNS1RpG-TAUbOh58rhqC9-Fui18x-C0ubpoCjopLz_7VzqK23u3ujXEa5nltkzPJQfOYhYWXfdSUh7L5RjZ-_G_Za1BMy5_ePkDM3LxqzMI3pZmsNZ6zHlTUGh1WExF66xXM5tIwuoSAIRBY7l47jltp2nNm86Kps01Gogdc3tyMrs7McJEOjD98_2PUck_1k4HqaIjdNnkiev09zdNeXEfN0FEspxNSOQvaoV-DipJnHbeFyfihZX1qmYOsfn8gwLZ__dZJVG8EHp1K983Piak74ShSXhbMUQnKMWgHYnTPz9znQHxJOEEWCMCArdZu53YTA=w2160-h1215
 

Users who are viewing this thread

Back
Top Bottom