Pinch Weld
Toyo Rt Trail
285/75/18
Toyo Rt Trail
285/75/18
What have you done to your 100 Series this week? (27 Viewers)
- Thread starter SHUSH
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Fog lights turned out nice @BenCC turns out great products
What brand of cross bars are you running on top?
How do you like the R/T Trail?
They are Rhino Rack - they were on when I bought it, and I haven’t taken them off, but I don’t know the model number.
I like them. Not loud at all and grip. I had Nitto Ridge Grapplers before these. I was going for the AT3 but they sold the pair and they had these in stock.
awesomeissquid
SILVER Star
Spend the weekend updating the storage setup in the trunk. Previously this compartments lids were held down with some recessed magnets. A few times on trips these have released and been annoying. Swapped them out for some Southco latches and some wood brackets. Next up is to carpet the whole top surface.
This is Labrador man…I wonder what Great Dane tastes like
White Rim Trail. Have been to Moab 11 times or so and done Hell's, Fin's and many, many more but never was able to work White Rim in. Doing it 2 days after Christmas was the way to go! We met I think 3 vehicles over two days but no other overnighters at any of the designated camping spots. We will definitley do it again. I logged 94.7 miles total. Didn't need it but having a full 4-gallon Roto on the swingout made me feel better. 
Tried an awning room. I think I will sell (keep the awning though) and just go with a Gazelle 90-second setup hub tent. Setting up the awning and then zipping the awning room to it in the dark in 20-degree weather was not ideal.
Tried an awning room. I think I will sell (keep the awning though) and just go with a Gazelle 90-second setup hub tent. Setting up the awning and then zipping the awning room to it in the dark in 20-degree weather was not ideal.
Last edited:
I've done some major work over the last month that I probably should have documented here, but this weekend, I made some brackets for the grille where the tab was broken off the light. I used two-part epoxy to bond it to the plastic with the screw holding it in place. It's very strong. I finished up the pinch weld and used a rivet to secure the plastic in place (I didn't have to cut it). I changed the thermostat, cleaned up the engine cover, and got the truck ready to go for an alignment, timing belt change, inspection, and brake fluid change.
I also had a new Ironman front bumper delivered yesterday, so that's the next project!
Old one is on the right. Note seals are cracked.
I also had a new Ironman front bumper delivered yesterday, so that's the next project!
Old one is on the right. Note seals are cracked.
I finally tackled the height control bouncy suspension with a fluid flush and four new accumulators/globes. The transformation is incredible! Like riding on a cloud. Night and day difference. It's like a new vehicle. The old accumulators/globes were original as far as I can tell, which makes them 25 years old and over 80,000 miles. So they were definitely due for replacement.
New steering shaft and exhaust leak fixed. Didn't feel like doing it myself this time. Also, picked up the truck and was happy with how perfect it was then the backup camera went out, so I ordered one of those.
Will second row seats from an 02 or newer fit into a 98?
Needing the car seat Latches in this stage of life.
Needing the car seat Latches in this stage of life.
Yes! I retrofitted 02 LX seats in my old 98 - they were a direct fit
Performed an AHC delete on my LX470 with much assistance from this forum. Got used LC100 rear springs and torsion bars from Cruiser Yard. Installed Gabriel Ultra Shocks as 95% of my usage is on the pavement. Rides great. Please see a thread I started about rear stabilizer bar link collar concern.
Thanks!!
PSA: in search of your 100 2002+ second row seats and also in search of any year 3rd row seats. Tan preferred.
Where are you located? Just took 2nd and 3rd row tan to local junkyard who has several LC/LX's
St. Louis, Lower Alabama, FL panhandle. We’re all over
05 Tacoma traction control switch
Fits perfect now I just have to wire it.
Fits perfect now I just have to wire it.
GTV
SILVER Star
I really like this idea. Keep us posted!
