What have you done to your 100 Series this week? (9 Viewers)

[Hoserock]

cut pad - rubbing compund
polish pad - meguiars micro glaze
ceramic coat

it needs someone who knows what they’re doing to go through the gamut

i just was like paint sucks, f*** it

Yo, any chance you ca do a YouTube on the process??

 

[BigBearBoards]

Boy, she's looking pretty good with a new paint!
I'd like to suggest that you start a "Build" thread to document everything you'll be doing to it. Then it's cataloged all in one place especially if someone really likes the type of build you're doing and wants to follow your thread. Doing so will add a gray oval "Build" tag to your thread. Then just post anything/everything you do to the 'ol girl.
Curious, is there still the "Bruiser" letters on the left rear hatch?

I think I’m going to do that and do a build thread on her. Although I will have to give most of the credit to you on about 90% of the build lol. You built a beautiful rig. No the BRUISER letters are gone but not by choice the body shop guy accidentally tossed them when he stripped her.

 

[jpd motorsports]

Can I get the info on your ahc lift? Been trying to figure what all I need to buy.

I did the sensor lift. was a 10mm wrench, slid the sensor to the top of the slot. nothing special at all purchased. theis is a geat write up on here about the ahc sensor lift.

 

[100d ua]

Baking under the sun for just a few more hours

 

[blackohio]

Yo, any chance you ca do a YouTube on the process??

Im the LAST guy that should be advising anyone,

 

[SmokerLC]

New Smittybilt 12k lbs wireless winch with synthetic rope and Factor 55 fairlead and ultrahook , behind the stock bumper with a TJM winch plate.
3 New 12 V USB cig lighter chargers, 2 of them with voltmeter, 1 for the front and 2 for the back passengers.
New TOYO AT3 295x75x16 rubber all around.

Pretty happy with the way it is looking now.

I just ordered a new PRINSU designs Roof Rack . cant wait to install it .

 

[SmokerLC]

Also Installed Old man EMU new Medium Heavy Duty Torsion Bars .

 

[blinder52]

New Smittybilt 12k lbs wireless winch with synthetic rope and Factor 55 fairlead and ultrahook , behind the stock bumper.
3 New 12 V USB cig lighter chargers, 2 of them with voltmeter, 1 for the front and 2 for the back passengers.
New TOYO AT3 295x75x16 rubber all around.

Pretty happy with the way it is looking now.

I just ordered a new PRINSU designs Roof Rack . cant wait to install it .

View attachment 2599417

View attachment 2599418

View attachment 2599419

Where did you source the back one?

 

[blinder52]

Time to replace those hard and leaky power steering hoses. Well, OK, flush the system too... and that reservoir bottle’s not looking to hot either. Biggest challegne is not making a crazy mess. Then realized you can complain about the mess or realize how nice and shiny it makes everything you clean off... oh and it‘s a rust inhibitor too!
I get such a child like enjoyment positioning those Toyota hose clamps just right and pulling the keeper off.

 

[blackohio]

KC LITES are starting to show up so mounted my two rear / scene. anyone know of a rotating mount?

 

[70 FJ40]

New Smittybilt 12k lbs wireless winch with synthetic rope and Factor 55 fairlead and ultrahook , behind the stock bumper.
3 New 12 V USB cig lighter chargers, 2 of them with voltmeter, 1 for the front and 2 for the back passengers.
New TOYO AT3 295x75x16 rubber all around.

Pretty happy with the way it is looking now.

I just ordered a new PRINSU designs Roof Rack . cant wait to install it .

View attachment 2599417

View attachment 2599418

View attachment 2599419

Your Cruiser is looking good. You will like the Prinsu rack. I have really liked mine. Both looks and function.

 

[Eyedaho]

New Smittybilt 12k lbs wireless winch with synthetic rope and Factor 55 fairlead and ultrahook , behind the stock bumper.
3 New 12 V USB cig lighter chargers, 2 of them with voltmeter, 1 for the front and 2 for the back passengers.
New TOYO AT3 295x75x16 rubber all around.

Pretty happy with the way it is looking now.

I just ordered a new PRINSU designs Roof Rack . cant wait to install it .

View attachment 2599417

View attachment 2599418

View attachment 2599419

My Prinsu rack went on pretty easily. There are a lot of fasteners, so I would recommend a small impact driver. You'll also need some silicone caulk, but you probably already know that.

 

[SmokerLC]

I got the plug from amazon.

Amazon product ASIN B08837F4JK
@70fj40 Thank you , I like the clean look without too many accessories, unless really needed. And the racks look so good, I really cant wait.

@Eyedaho thanks for the heads up, I've seen a couple of them getting installed , but thanks for the reminder on the silicone caulk.


Thinking about getting exhaust done for less restriction. Open to ideas...

 

[blinder52]

I got the plug from amazon.

Amazon product ASIN B08837F4JK
@70fj40 Thank you , I like the clean look without too many accessories, unless really needed. And the racks look so good, I really cant wait.

@Eyedaho thanks for the heads up, I've seen a couple of them getting installed , but thanks for the reminder on the silicone caulk.


Thinking about getting exhaust done for less restriction. Open to ideas...

I have the perfect place for that.

 

[SmokerLC]

Eyedaho​

Do you have any pics of your rig with the rack on ?
Anyone knows the diff between the Prinsu and the Prospeedrack ? they look very similar.

 

[Eyedaho]

Eyedaho​

Do you have any pics of your rig with the rack on ?
Anyone knows the diff between the Prinsu and the Prospeedrack ? they look very similar.

Sorry, I don't think I have any pics. I can take some when it's light out. I don't know if there's a lot of difference, but I only have experience with the Prinsu. I'm a little biased since they're made here in Idaho too.

 

[100d ua]

All righty so I installed the OPOR sliders and gotta be honest, at first I wasn’t really feeling it but I moved the car from my lawn into the driveway and got a different perspective on it and I can say I’m digging it. (Didn’t wanna scratch up the paint on the driveway)

I think I may have installed them too close to the floor of the bottom side because when I turned on the car I swear it’s louder and I can feel the whole exhaust through the car. Any thoughts? Not a big deal if so, I can loosen them up and drop them, that’s easy.

Oh, and topped off the night with new windshield wipers.

 

[70 FJ40]

@SmokerLC here is a few pics of mine.

 

[70 FJ40]

Since these pictures I have added a light bar to the front.

 

[Pahizzl]

Hooked up my rear view camera. Field of view is terrible. I went ahead and ordered the adjustable version.

Also hooked up a battery tender.