What have you been doing with your Toyota? (6 Viewers)
- Thread starter JohnnyOshow22
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
- Joined
- Jul 24, 2016
- Threads
- 58
- Messages
- 1,620
- Location
- BoZ ANGeLES
- Website
- backcountryadventuretime.com
https://backcountryadventuretime.wo...and-trail-ride-to-twin-lakes-june-23-24-2018/
Blog post of our trip to the Twin lakes lasr weekend. To many awesome pictures to post here.
Blog post of our trip to the Twin lakes lasr weekend. To many awesome pictures to post here.
- Joined
- Jul 24, 2016
- Threads
- 58
- Messages
- 1,620
- Location
- BoZ ANGeLES
- Website
- backcountryadventuretime.com
Camping at lower Surehot lake and trail ride to Twin lakes – June 23-24, 2018
Blog post of our trip to the Twin lakes lasr weekend. To many awesome pictures to post here.
Blog post of our trip to the Twin lakes lasr weekend. To many awesome pictures to post here.
JohnnyOshow22
KK0TEQ
- Thread starter
- #164
Started a set drawers with the help of @Black798 and @ttFJC they're simple and will work well. Still need to bolt the down but they're a work in progress. Goal is to have a completely flat back in the 80 with storage underneath so the dogs have the whole back when camping besides where the cooler is off to one side. The other goal was to be able to have either middle row seats in with if I wanted/need to have 3 seats
Painted my engine today.
Did a lot of miles on scenic dirt roads this weekend. Took rock creek road to phillipsburg then skalkaho pass to Hamilton and then Ambrose saddle to eight mile saddle and back to Clinton. Pretty much covered the whole sapphire mountain range about 200 miles on dirt
yeah skalkaho Looks like it be fun with snow. Skalkaho falls are well worth the drive
Hey Jtxterra did I see you guys yesterday in Drummond just before the parade? I was in a built black 80 with Tepui tent on top. We all waved at eachother.
that would not have been me. We would have been in Clinton/ Florence up eight mile saddle by that time I believe. We took skalkaho towards Hamilton not to philipsburg
JohnnyOshow22
KK0TEQ
- Thread starter
- #171
A few of this that have me on Facebook and instagram have already seen this but I found a new use for a deep 12mm 3/8" drive socket yesterday
Travelled from Bozeman MT to Loveland CO yesterday since i'm getting married on Saturday in keystone. I made it about a third of the way when I pulled into Sheridan to get gas and as I was pumping gas some coolant flowed out from underneath and started pooling around my sandle. Turns out that the exhaust shop when doing the over the frame reroute had not told me or Robbie (to my knowledge) that they had deleted my rear heater! Instead of getting a new soft line and making a U to the hard lines that go to the rear heater they used a plastic cylinder to connect the original two hoses!!! This melted and caused me to loose a bunch of coolant, luckily it happened right when I pulled into the gas station. My fix was to replace the plastic cylinder with take 12mm deep socket.
Travelled from Bozeman MT to Loveland CO yesterday since i'm getting married on Saturday in keystone. I made it about a third of the way when I pulled into Sheridan to get gas and as I was pumping gas some coolant flowed out from underneath and started pooling around my sandle. Turns out that the exhaust shop when doing the over the frame reroute had not told me or Robbie (to my knowledge) that they had deleted my rear heater! Instead of getting a new soft line and making a U to the hard lines that go to the rear heater they used a plastic cylinder to connect the original two hoses!!! This melted and caused me to loose a bunch of coolant, luckily it happened right when I pulled into the gas station. My fix was to replace the plastic cylinder with take 12mm deep socket.
- Joined
- Jul 24, 2016
- Threads
- 58
- Messages
- 1,620
- Location
- BoZ ANGeLES
- Website
- backcountryadventuretime.com
should we rename this thread to "what did @JohnnyOshow22 do to his toyota today"? 
Kind of reminds me of the mag light fix we did on the Nissan the day tom tipped the fj
JohnnyOshow22
KK0TEQ
- Thread starter
- #174
Hey man someone has got to keep mud updated instead of just posting to their Instagram story!should we rename this thread to "what did @JohnnyOshow22 do to his toyota today"?
- Joined
- Jul 24, 2016
- Threads
- 58
- Messages
- 1,620
- Location
- BoZ ANGeLES
- Website
- backcountryadventuretime.com
i don't own a wrench and i know my audience. MUD doesn't need 100 pictures of my dog a day unless he's sitting in your 80. Just sayin'
A little rack boot r&r on the 100.
Picked up my straightened, balanced, and new ujoints front driveshaft today.
My rear one has worn splines if anyone has one lying around that would make a good core. Driveline Express can rework it too but just trying to save a little coin. Thanks!
Did a complete overhaul of my front suspension on the 4runner last week to get it ready for a week of wheeling in Colorado with @JohnnyOshow22 and @ttFJC. Got it aligned Friday at 5pm and drove 700 miles to Denver leaving Saturday at 4am without issue.
New rack, tie rods, control arm bushings, upper control arms, spindle gussets, and a set of King coilovers.
IMG_9032 by Phoenix Black, on Flickr
IMG_8978 by Phoenix Black, on Flickr
IMG_8971 by Phoenix Black, on Flickr
IMAG0246 by Phoenix Black, on Flickr
New rack, tie rods, control arm bushings, upper control arms, spindle gussets, and a set of King coilovers.
IMG_9032 by Phoenix Black, on Flickr
IMG_8978 by Phoenix Black, on Flickr
IMG_8971 by Phoenix Black, on Flickr
IMAG0246 by Phoenix Black, on Flickr
- Joined
- Jul 24, 2016
- Threads
- 58
- Messages
- 1,620
- Location
- BoZ ANGeLES
- Website
- backcountryadventuretime.com
Hard day of wrenching for me
