Weber 38 jet sizing

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Biscuit

Mars Rover Driver Emeritus
SILVER Star
Joined
Jun 5, 2005
Threads
82
Messages
977
Location
Boulder, CO
So I've got the weber 38 installed on my F and just brought it down from a mile high to 800'ish above sea level. And as always the carb needs so tweaking.

My question is what do you slightly above sea level folks with Weber 38s run for main and air corrector jets?

(And yes I ran a search and got some ranges but no firm numbers)
 
man a fre sells that carb, they may be able to help.

i know when i bought mine from them, they installed the rightt jets and imulsifier tubes for my alltitude 6000 ft before they shipped it to me....
 
thanks for the info. I stubmled across the JT Outfitters spec sheet for what is in it when they ship. I'm going to try that as a "default" setting and adjust from there.
 
Is that a typo, or are you really worrying about 800 feet of difference?
If it's 800 fer-real, and not 8000, I'd just re-set the idle mix and call it good.
 
The Tech Support guys at MAF can be surprisingly helpful when it comes to Weber jet sizes.
 
Chef said:
Is that a typo, or are you really worrying about 800 feet of difference?
If it's 800 fer-real, and not 8000, I'd just re-set the idle mix and call it good.


how many feet are in a mile?;)
 
Back
Top Bottom