Wanted: Axle Advice

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jan 10, 2007
Threads
3
Messages
16
Location
Seattle
This issue revolves around locked axles and how necessary they are for getting off road.

I'll begin with the background: I have an unlocked LX450 I use as a daily driver. Due to my commute and $3.35 per gallon fuel, I've been mulling over the idea of getting a nice clean commuter car and setting up the LX to do a bit of trail running, but I keep coming back to the issue of the factory lockers I don't have. Based on what I've read here, lockers seem to be very important for setting up a trail rig. So, at this point I usually shelve the idea and keep commuting.

But (jumping to the present) I now have to do a birf job that I really don't have the skills or the tools for and the price of taking it in to the shop for this is going to be steep ($800.00 at the low end, $1500 at the top).

So, the question is this: based on the idea of what I want to do with the LX and the cost of the birf job, what if I looked about for a pair of used OEM locked axles bought those and sold my unlocked ones and did the axle swich instead? I have no idea how available used locked axles are or what they cost. Is this even worth thinking about? :cheers:
 
Where do you live in Seattle? Do you have tools? Can you have parts by the week of Thanksgiving?

I will be out there and can knock it out in a few hours...

Used locked axles are spendy...don't go there. You are better off not worrying about lockers, get armored, then as you improve get an aussie for the rear, then an ARB in the front when your regear :)
 
This issue revolves around locked axles and how necessary they are for getting off road.

They aren't necessary at all. They are a nice luxury to have as an 'ace in the hole' but you can enjoy a lifetime of trail exploration and never need lockers.

Lockers should come close to last in the build list; after tires, armor, suspension, and a winch. You will know when you have reached the point where you *need* lockers.

Get those axles serviced and pick a weekend trail to explore!

m.
 
They aren't necessary at all. They are a nice luxury to have as an 'ace in the hole' but you can enjoy a lifetime of trail exploration and never need lockers.

Lockers should come close to last in the build list; after tires, armor, suspension, and a winch. You will know when you have reached the point where you *need* lockers.

Get those axles serviced and pick a weekend trail to explore!

m.

I was thinking along those lines, but from my 80s forum reading lockers are a pretty big issue around here. I'm no trail expert, so I'm not going to run the LX up the side of Mt. Rainier the 1st time out of the box...hmmm.
 
If you swap in new axles, the first thing they will need is a birf job. So that's likely a pre-requisite either way.

True, but the thought process here was something along the lines of: "...for a few more dollars AND if I'm gonna have to do the service anyway, why not swap out the whole shootin match and get locked up". Probably not rational or financially sound...
 
Lockers are good, but I ran a lot of fun trails with no lockers and a bunch more with just a rear ARB. I would not put a primitive locker like an Aussie or Detroit in a truck as nice as an 80 series.

If you do decide to lock the truck, ARBs would be a nice choice. There is no way I would retrofit factories.

Anyway, take it out and see where you can't go. If you still want to go there, get lockers. Armor, a winch, and friends with an occasional tow strap will get you a long way.
 
Lockers are good, but I ran a lot of fun trails with no lockers and a bunch more with just a rear ARB. I would not put a primitive locker like an Aussie or Detroit in a truck as nice as an 80 series.

If you do decide to lock the truck, ARBs would be a nice choice. There is no way I would retrofit factories.

Anyway, take it out and see where you can't go. If you still want to go there, get lockers. Armor, a winch, and friends with an occasional tow strap will get you a long way.

Sound advice. Especialy the part about friends and tow straps...:D
 
Lemme know if you want to do the rebuild on the 19th. I have time, a car to get to you, and can pack the tools we need.
 
Lemme know if you want to do the rebuild on the 19th. I have time, a car to get to you, and can pack the tools we need.


I think you'd be crazy to turn down this offer - once you she how it is done, you won't be intimidated by it....

bk
 
I gotta say I'm jealous. I did my front rebuild on my own (well, actually all of mud was there to help . . . ).

I would have LOVED to have someone with as much experience as DK help me out (actually, I would have liked to have anyone help me out). I did have a lot of support, just no one standing there showing me the steps.

Take the offer - really.
 
I gotta say I'm jealous. I did my front rebuild on my own (well, actually all of mud was there to help . . . ).

I would have LOVED to have someone with as much experience as DK help me out (actually, I would have liked to have anyone help me out). I did have a lot of support, just no one standing there showing me the steps.

Take the offer - really.

x 2
 
If you don't have the skills or tools to do a birf job, why would you feel you have the skills to swap out two axles and install the electrical harness for the e-lockers? I am not trying to be a smart ass, just trying to get you to think a little further ahead.

Take Dan's offer. Make sure you have food and beer for him.

Buck Buchanan
 
I've read nothing but good things about Aussie lockers. Not as nice as an ARB, but a heck of a lot less money. Plus, alot easier to install. They are supposed to be head and shoulders above the other "lunchbox" lockers. If you can get the ARB though, go for it.
 
Is this even worth thinking about?

No, swapping axles is not worth thinking about for a casual off-roading vehicle and an owner that is new to the hobby.

As others have said, take up Dan on his offer or get the parts and tackle it yourself, or take it to a trusted mechanic and pay them to do it.

When (and if) you get deeper into the hobby, have a built up truck, and are ready for the expense, you can regear and install ARB lockers at the same time.

My 2c.

-B-
 
Back
Top Bottom