- Thread starter
- #101
Don’t worry. We’ll get it.
ARCHIVE Victory4x4 LC200 build, prototyping and product development!
- Thread starter brimy311
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
- Thread starter
- #102
Rear strike progress.
Is it hard to get a rear to match the profile of the bumper on the sides? I've noticed with several of the rear bumpers (this one included) that the bumper sticks out a tad in the rear quarter panel. I'm not a welder so I really don't know but with most of these designs I mentally want the corners to pull inward slightly. (OTOH maybe it's good for body protection?)
I'm postponing my purchase of Rhino 4x4 front bumper to see how this turns out.
I'm highly interested for my LX.... It puts a quandary.
CharlieS
GOLD Star
- Joined
- Feb 4, 2005
- Messages
- 9,099
I wish for tucked up and in. I keep on whacking the corners on rocks.
i am really liking the hi-lift points on each side and 2 in the back... may be the optics but maybe tucking the sides in 1/4" (outside only).. interested to see the carriers as well - i like the tow points, and the step area on the top as well.
is there a place for the trailer hookup on the back or is it under?
is there a place for the trailer hookup on the back or is it under?
Not bumper related but thought I would post how I have put the 200 series console molle panels to good use. Added a fieldcraft survival tourniquet holder and an olight warrior pro flashlight to the passenger side. The install was super easy for the panels and has been a great use of space for quick access items.
- Thread starter
- #110
Here is the progress on blitz sliders:
- Thread starter
- #111
Here is the roof rack. Working on documentation, then released!
- Thread starter
- #112
Working on skids as well:
RLCA skids At the front frame would get a lot of interest!
Is this an 8 foot or 6 foot rack? I mean roof attachment points, not length or width.
Last edited:
roof rack looks sexy!
Couple questions. Assuming there’s going to be an option for front fairing with lightbar.
2. the bars seem to sit just a tad below the side rails. Will this be an issue for RTT’s that are wider than the side rails?
3. cost and lead time?
Looks like six to me - the attachment foots have a second row of bolts towards the bottom. Feet at positions 1/3/4.
Take my dang money!
- Thread starter
- #118
6 mounts
- Thread starter
- #119
1.) Yes to light bar option
2.) 1/2” below. We make some RTT mounts to aid in the installation.
3.) Still working that out. Our rack lead times are around 15-25 business days right now.
- Thread starter
- #120
Here are some photos of the rear bumper and carriers getting set up.
Similar threads
