Tuffy Security is Interested

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

It looks like we have a volunteer vehicle to take a look at. I have also passed on the list of suggestions from the forum to our design guy. Once he gets a good look at it, I will post an update.

For the easy way out, a mounting bracket that would work with standard console would be great and wouldn't cost all that much to develop. A few mudders have used the consoles already and like them as is, they just had to booty-fab the mount. I still might bend up a little metal and do the IronYuppy install.

If you want to change the design, the only vanilla change would be to make it a little shorter so it doesn't interfere with folding the rear seats and figure out the cup holders. If people want to add their plugs, ports, expresso machines, etc, that's on them. I think it would be easier to sell to the suits, and to the masses with minor changes.


Just sayin:meh:
 
Last edited:
For the easy way out, a mounting bracket that would work with standard console would be great and wouldn't cost all that much to develop. A few mudders have used the consoles already and like them as is, they just had to booty-fab the mount. I still might bend up a little metal and do the IronYuppy install.

If you want to change the design, the only vanilla change would be to make it a little shorter so it doesn't interfere with folding the rear seats and figure out the cup holders. If people want to add their plugs, ports, expresso machines, etc, that's on them. I think it would be easier to sell to the suits, and to the masses with minor changes.


Just sayin:meh:

I don't think thats the direction they are thinking. I just saw the new one they designed for the Jeep TJ and they went all kinds of nuts with it. They DEFINITELY took the modder's cues and built on it for that project.
 
I don't think thats the direction they are thinking. I just saw the new one they designed for the Jeep TJ and they went all kinds of nuts with it. They DEFINITELY took the modder's cues and built on it for that project.

Yeah, I know. But how big is the Heep market versus the LC market? Granted the LC and Pink Panty market is vastly superior in their quality, but how many will they have to believe they are going sell in order to justify a completely new design?

It's all dollas' and cents:hillbilly:
 
Yeah, I know. But how big is the Heep market versus the LC market? Granted the LC and Pink Panty market is vastly superior in their quality, but how many will they have to believe they are going sell in order to justify a completely new design?

It's all dollas' and cents:hillbilly:

Yes but how many more are they going to sell if they include such things as outlets pre-stamped and a spot for a inverter, etc etc. regardless if the person buying it uses it or not? I would be more apt to purchase something that does more than I need to do instead of buying something knowing I need to modify it to get it to work. Adding an extra bracket and having it pinch welded on and then having the power outlets punched leaving a small tab that can be knocked out in case the customer decides to use the hole would be in Tuffy's best interest.
 
Yes but how many more are they going to sell if they include such things as outlets pre-stamped and a spot for a inverter, etc etc. regardless if the person buying it uses it or not? I would be more apt to purchase something that does more than I need to do instead of buying something knowing I need to modify it to get it to work. Adding an extra bracket and having it pinch welded on and then having the power outlets punched leaving a small tab that can be knocked out in case the customer decides to use the hole would be in Tuffy's best interest.

You know that's a good point. I've already got a console I can modify to my heart's content (and have :D) but a more purposeful approach where it didn't look like someone just poked holes in a perfectly good center console kind of has its appeal. Ok, I'm kinda interested in these now..
 
For the easy way out, a mounting bracket that would work with standard console would be great and wouldn't cost all that much to develop. A few mudders have used the consoles already and like them as is, they just had to booty-fab the mount. I still might bend up a little metal and do the IronYuppy install.

If you want to change the design, the only vanilla change would be to make it a little shorter so it doesn't interfere with folding the rear seats and figure out the cup holders. If people want to add their plugs, ports, expresso machines, etc, that's on them. I think it would be easier to sell to the suits, and to the masses with minor changes.

The hard part here is the interface between an existing Tuffy console and the OEM console around the shifter as the OEM console slides into it. Every Tuffy I've ever seen made to work in an 80 did not look very clean in this area. As a result I could never see putting a current unit in my rig. This is just my opinion. But I will admit I enjoy driving a "luxury" SUV that is also an excellent trail rig. This is my DD and family vehicle so keeping the interior looking clean is important to me.

I know there are plenty of 80 series owners on both sides of the fence.
 
I agree. Options are great for an inverter compartment, outlets etc... all things I eventually want, but the transition between the existing shifter console and the new tuffy console needs to be a nice fit/finish. That will go a lot further in selling these consoles, and has been the reason I have not put a non-80 custon tuffy in mine yet. If that is a clean install/transition then I think a lot more 80 guys will buy.
My 2 cents may only be worth a penny though.
 
My side of the fence.

Corbet,

As you noted, the most difficult part of the Tuffy install is the intergration of the new console to the existing front console. My install is less then perfect, but I can live with the results. I reused the trim piece from the OEM console, carefully used the dremmel to enlarge the opening to house the new console, then I installed the trim to cover the rough cut, I guess you could use a section of flexible edge guard to disguise the roughness as well, but I like to recycle parts if, and when I can. Now, as far as Tuffy building a 80 series specific model to meet all, or even some of the mods listed is not practical or cost effective. I paided 200. and spent 4hrs moderately fabbing this console to have a base to build from, that provides limited security, and that can house HAM equipment, radios, inverts, gauges, etc....
tuffy intergration03.webp
tuffy intergration02.webp
tuffy intergration.webp
 
The hard part here is the interface between an existing Tuffy console and the OEM console around the shifter as the OEM console slides into it. Every Tuffy I've ever seen made to work in an 80 did not look very clean in this area. As a result I could never see putting a current unit in my rig. This is just my opinion. But I will admit I enjoy driving a "luxury" SUV that is also an excellent trail rig. This is my DD and family vehicle so keeping the interior looking clean is important to me.

I know there are plenty of 80 series owners on both sides of the fence.

Apart from functionality, the original idea of this thread was to get something done that wasn't a ghetto fit. Something that looked like it belonged and for all intents and purposes actually has a nice clean seamless fit.

I believe things are moving along nicely. It's not going to suit everyone... but it'll be practical enough to suit most.
 
Last edited:
Vango, I think you did an excellent job fitting the existing Tuffy console into your 80. But I'm still hoping this turns our to be a near OEM like look with what ever they come up with. Fit and color. But to do so I think they may have to replace the shifter console too.
 
But to do so I think they may have to replace the shifter console too.

NOW, you're talking. If they can do this for other vehicles, they should be able to make it for the 80 series as well.
 
Did my Tuffy console in a few hour using stock mounting points and 1" square stock to level the back. Trimmed the shifter console to move forward. Back seats will fold up, easy mod.
IMG_1279.webp
IMG_1284.webp
 
Titanium and CFRP!

I agree with everybody it has to have a arm rest and not hinder the rear seats coming forward. I would like a very secure place to put remote ham radio(HF/VHF) and small net book. Cup holders removable for washing; very secure for valuables (I pod and etc.), 12 volt power points 2 each, variable rear heater vents and maybe room for inverter 2000 watt?
maybe made from titanium bottom for the safe compartment and CFRP top non locking (just the like the Boeing 787!).
 
Did my Tuffy console in a few hour using stock mounting points and 1" square stock to level the back. Trimmed the shifter console to move forward. Back seats will fold up, easy mod.

What model tuffy is that?
 
Back
Top Bottom