Trail Tailor Offerings (6 Viewers)

[TRAIL TAILOR]

Nice development!!
Do you have a pic with these over the oem plastic plates?

Look again.... Those are over the plastic plates in the pics...

 

[TRAIL TAILOR]

All hands on deck today.

Tony and I working on the Akuma build. I packaged 3 sets of sliders, build some parts and palleted a bumper order.
Pete and Damian working on the 6x6 bed and Damian started tearing down the Scout II
@Butt Ugly Chuck and Bob ran a new air line to the paint shop and my other personal shop. Butt went and grabbed breakfast burritos for everyone. Thank you so much for running that errand buddy and helping Bob.

Busy morning.

 

[TRAIL TAILOR]

Scuff plate install.



Jason
TT

 

[TRAIL TAILOR]

Seth... AKA @TRFarmers sent me a set of their new B-pillar seat belt covers to test fit and take to SEMA 2024. Stellar product and much thicker than the originals. I can twist these and they DO NOT ... SNAP, CRACKLE, POP...!!!

Quality and fit is exemplary as usual with all their products. Highly recommend these for all that need a replacement set. I will be stocking these is black, brown and grey as well.

He also sent D-pillar inners and 60 trim covers for the quarter windows/panels. I have not test fit these but compared them to OEMs I have on hand and they are spot on as well.

Jason
TT

 

[DrRock]

All hands on deck today.

Tony and I working on the Akuma build. I packaged 3 sets of sliders, build some parts and palleted a bumper order.
Pete and Damian working on the 6x6 bed and Damian started tearing down the Scout II
@Butt Ugly Chuck and Bob ran a new air line to the paint shop and my other personal shop. Butt went and grabbed breakfast burritos for everyone. Thank you so much for running that errand buddy and helping Bob.

Busy morning.


View attachment 3715277View attachment 3715278View attachment 3715279View attachment 3715280

Hey Jason, what horns are those? I’d like to install some new ones and those look like they are a good quality option.

Cheers, James

 

[TRAIL TAILOR]

Hey Jason, what horns are those? I’d like to install some new ones and those look like they are a good quality option.

Cheers, James

Hella supertones

J

 

[cps432]

Seth... AKA @TRFarmers sent me a set of their new B-pillar seat belt covers to test fit and take to SEMA 2024. Stellar product and much thicker than the originals. I can twist these and they DO NOT ... SNAP, CRACKLE, POP...!!!

Quality and fit is exemplary as usual with all their products. Highly recommend these for all that need a replacement set. I will be stocking these is black, brown and grey as well.

He also sent D-pillar inners and 60 trim covers for the quarter windows/panels. I have not test fit these but compared them to OEMs I have on hand and they are spot on as well.

Jason
TT

View attachment 3734497View attachment 3734498View attachment 3734499View attachment 3734500

Holy cow!! I was just going over the cost and labor of fiberglassing and repairing all my original panels that are intact or slightly damaged. Everything inside the truck has become brittle and I feared shattering something every time I have to open something up.

These look fantastic! Any ideas on when they’re going to hit the market?

 

[TRAIL TAILOR]

Holy cow!! I was just going over the cost and labor of fiberglassing and repairing all my original panels that are intact or slightly damaged. Everything inside the truck has become brittle and I feared shattering something every time I have to open something up.

These look fantastic! Any ideas on when they’re going to hit the market?

I would expect in the next couple of months. Waiting on a reply from Seth now.

 

[TRAIL TAILOR]

Lunar Rock build loaded out at 5am this morning headed to TX.

Jason
TT

https://youtube.com/shorts/4eTIHJWLPQw?feature=share

 

[TRAIL TAILOR]

Bumpers finished up for a local customer to pickup.

Jason
TT

 

[TRAIL TAILOR]

Another front with recessed Baja Designs Squadrons

New table top too. 1/2" x 50" x 50"

J

 

[TRAIL TAILOR]

Good day. My good buddy @Butt Ugly Chuck stopped by and I put him to work.... HA. He helped clean up a bit and I trained him up right quick on the small press brake. Bent out 20 sets of C-Channel kits for me. I have some of the best cruiser buddies in the world. Can't thank them enough.

Got a rear dual swing base welded out and ready for the next order to customize.

Jason
TT

 

[TRAIL TAILOR]

Wiper C-clips are back in stock and on sale.

Building up bumper and slider inventories as well. I'm taking orders on these now.

Jason
TT

 

[MoaByte]

Wiper C clips? For the knuckle? I hate to ask a stupid question but if I need educated... I want to know.

 

[TRAIL TAILOR]

Wiper C clips? For the knuckle? I hate to ask a stupid question but if I need educated... I want to know.

Windshield Wiper Linkage - C-Clips

Wiper Bushing Repair Clips 60 Series

Toyota Land Cruiser FJ60 60 Series Sloppy wipers? These clips will tighten up those worn out bushings and make them run well again. Made from stainless steel for extra weather resistance and longevity CNC lathed for precision accuracy and fit Sold in pairs

trail-tailor.com

 

[MoaByte]

Windshield Wiper Linkage - C-Clips

Wiper Bushing Repair Clips 60 Series

Toyota Land Cruiser FJ60 60 Series Sloppy wipers? These clips will tighten up those worn out bushings and make them run well again. Made from stainless steel for extra weather resistance and longevity CNC lathed for precision accuracy and fit Sold in pairs

trail-tailor.com

Jason, you are always looking out for me. These will fit my 1980 long bed pickup too?

 

[TRAIL TAILOR]

Jason, you are always looking out for me. These will fit my 1980 long bed pickup too?

Rumor is yes and 70 series too, but I have not ever test fit them.

 

[MoaByte]

Rumor is yes and 70 series too, but I have not ever test fit them.

Lol, they will fit.
What I love most about my 60 are he TT goodies.
Thank you Jason.

 

[TRAIL TAILOR]

Getting the new 60 chassis table set up.

Frame rails are dimensioned, marked up and ready to test cut. If all is good I'll send the files to the laser cutter for rotary cutting.

These will be 2 x 5 x .188 tube/boxed frame for Gen 4/5 motor swaps with 4, 6 and 8 speed transmissions, 4 corner coilovers, front and rear 4 link with 80 series style custom axles, 80/105 steering box.

The prototype and first 6 are pre-sold.

I will be putting one under my new personal build. LT4 Erod, 8L90, HF2A (keeping it AWD), 4.10s Eaton E-lockers, 4340 and 300M axles, adjustable C/Os, adjustable links with OEM adjustable ends with bonded bushes.

Gonna be an exciting 2025.

 

[clrussell]

Getting the new 60 chassis table set up.

Frame rails are dimensioned, marked up and ready to test cut. If all is good I'll send the files to the laser cutter for rotary cutting.

These will be 2 x 5 x .188 tube/boxed frame for Gen 4/5 motor swaps with 4, 6 and 8 speed transmissions, 4 corner coilovers, front and rear 4 link with 80 series style custom axles, 80/105 steering box.

The prototype and first 6 are pre-sold.

I will be putting one under my new personal build. LT4 Erod, 8L90, HF2A (keeping it AWD), 4.10s Eaton E-lockers, 4340 and 300M axles, adjustable C/Os, adjustable links with OEM adjustable ends with bonded bushes.

Gonna be an exciting 2025.

View attachment 3778562View attachment 3778563

That’s wild. I can’t wait to watch the build