Trail Tailor Offerings- Racks, Sliders, Control Arms and Misc

[TRAIL TAILOR]

Love the 2.5" option. Basically solve my (future) indecision.

I think it will for most that have been ordering the TourFlex.

 

[Captramrod01]

Anymore info on the UCA? Will the bushings be poly or oem style rubber?

 

[TRAIL TAILOR]

Anymore info on the UCA? Will the bushings be poly or oem style rubber?

I'll be using a sealed joint variation. Poly inner bushings with a rubber boot.

J

 

[TRAIL TAILOR]

Finalized the Trail Tailor UCAs today with the machine shop and Currie.

3 Degree fixed caster correction
Machined Currie arm joints- 2.5" OD x 2.625" x 14mm full flex, no bind joints - rebuildable and greasable
4130 CrMo x .250" wall tube arms and 4130 ball joint cups
Sealed maintenance free ball joints with 4140 CrMo ball stems and SAE 1045 forged bodies
Red Powder Coating
Completely assembled

$619.00

Pics and more details to come.

Jason

 

[TRAIL TAILOR]

4130 CrMo ball cups for the new UCAs are about finished up.

J

 

[gatormark91]

Finalized the Trail Tailor UCAs today with the machine shop and Currie.

3 Degree fixed caster correction
Machined Currie arm joints- 2.5" OD x 2.625" x 14mm full flex, no bind joints - rebuildable and greasable
4130 CrMo x .250" wall tube arms and 4130 ball joint cups
Sealed maintenance free ball joints with 4140 CrMo ball stems and SAE 1045 forged bodies
Red Powder Coating
Completely assembled

570.00 shipped to the lower 48.

Pics and more details to come.

Jason

Dammit, you just had to go and make these right after I bought SPC UCAs.

 

[bgolf247]

Dammit, you just had to go and make these right after I bought SPC UCAs.

This is why I have been holding off. Waiting to see what this looks like

 

[atnolan94]

Let me know when these are ready to go. Christmas bonus well spent!!!

 

[TRAIL TAILOR]

UCA caps are finished and headed to the plater for anodizing.

CrMo tube arrived so I can finish up the beds, saw/notch jigs and final assembly fixture.

J

 

[LuisJr]

Mother of God.....

 

[Parbo]

I need them! Put me in the list Jason.

 

[geanes]

Oh crap! I just did the Nitros earlier this year from you, but these would be at the TOP of my list for 2019 upgrades!

 

[TheDan]

Are these gonna be a limited run or constantly available. Super interested.

 

[yotasavg]

Good god, that's a no-brainer for next time UCAs.

 

[atnolan94]

ETA on these? This Money is burning a hole in my pocket.

 

[TRAIL TAILOR]

I need them! Put me in the list Jason.

Not really a list going on these. I'll PM you when they are ready.

Are these gonna be a limited run or constantly available. Super interested.

Like most of my products, I'll run these in batches and as long as they sell.... I'll keep making they. They will be a stock item for now.

Good god, that's a no-brainer for next time UCAs.

Thanks

ETA on these? This Money is burning a hole in my pocket.

About two weeks if everything goes as planned. I'm working on the notching and fixture jigs now. 50 ball cups are on the shelf, 50 more are in production in the lathe, 50 aluminum caps are at the plater for anodizing and 50 more caps will go in the mill starting Thurs/Fri.

J

 

[TRAIL TAILOR]

On another note, I'll be trying to take most of December and January off. Finishing up another Patrol for my importer in Portland and then I'm headed to Spokane to pick up my rolled 100 for R&D. I bought another 80 today to chop up to start designing a SAS swap kit.

J

 

[Kabanstva]

On another note, I'll be trying to take most of December and January off. Finishing up another Patrol for my importer in Portland and then I'm headed to Spokane to pick up my rolled 100 for R&D. I bought another 80 today to chop up to start designing a SAS swap kit.

J

WOW. This just got real! If this happens, I might even pick up a second 100 series and do that!

 

[LuisJr]

I'll be waiting for that SAS!!!

 

[TRAIL TAILOR]

Any interest in CrMo front axle sets? I had a set made for my build (VERY pricey as a one-off)

Sent my machinist a OEM set and had him reproduce them in 4340 CrMo.


Jason