Trail spare - steering box?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Aug 31, 2014
Threads
11
Messages
173
Location
Westminster, CO
I've seen this called out a few times as an item to carry as a trail spare for some of the tougher trails (Dusy, Rubi, etc) - but how many of you actually do? A search shows a number of threads about rebuilding due to leaks/slop, but I didn't find really any on them breaking trail side. I like to get out and play in the rocks so I'm building out the kit I carry with me as far as tools and spare parts go, but this one packs a pretty good financial punch to have just sitting in the back of the cruiser. Thanks.
 
Seems like if Dusy/Rubi/etc are on your radar, would it be easier to add hydro to your box in order to alleviate some of the burden on your tired box? This is after doing the usual PM of course.
 
Sector shaft splines twist/break on a few rigs. Gotta beat them pretty hard to damage them. Out of a dozen or so 80s (on 37s) that I wheel with, NONE of them have broke on yet in the 6 years I have owned mine.
 
I reckon the steering arms would fail first, steel tube is fairly easy to bend. Never seen a box failing on any stock vehicle, and it was rumoured once on a hard worked rig with 37's?


regards

Dave
 
I've seen them outright break twice. It happens. Once on the Dusy oddly enough. It was enough that I ponied up the $150 to always carry a spare. If that means I never break, that's even better.

Actually, 3 times. One broke on Golden Spike in Moab too.
 
Depends on what you run and how you drive.

If I drove like some of the guys in the videos I've seen on here, I would probably pull a parts truck.

If I ran the heavier links/heavier ends than the factory ones, I would bring the whole steering system with me.

That, or maybe hire a driver?
 
I've carried a box for a spare for a couple years. It fits nicely in a 5gallon bucket. I have seen them break.
 
Depends on what you run and how you drive.

That, or maybe hire a driver?

While that's true, there is unpredictability in what we do, and a broken steering box a long way from the road, is a very difficult problem. Without an intact box, you're walking.

Just for the record, none of the 3 I have seen were mine. But if you find a used box at a reasonable price, you should jump on it.
 
I was at CM in 11 when that box broke on Spike. We caught up with the rig after they had abandoned it for the day. No spare but he did have a ride out. Most often tie rods and drag links seem to give it up/bend, but most of the time they are easily band aided to get home. I have not had those problems, yet? But I did Fubar a night landing enough to bend the front axle housing by 3.5 degrees. It was visably obvious. I drive it back onto the trail and all the way home(2hours). Actually took it wheeling 2more times before I had the opportunity to deal with it.
 
Never busted one on 37s here but all of my part rigs I have sold the steering boxes from if that tells you anything.
 
... Never seen a box failing on any stock vehicle, ...

Have seen them twisted or broken on stock rigs, the common cause was big accidents. Have seen them twisted or broken on wheeler rigs, what was common, all had HD tie/drag links.

If you're that concerned, swap in a 105 sector and pitman. A bunch of us have wheeled them hard, long term, 37" tires, etc, have bent, broken a bunch of stuff, never twisted or broken a sector, but all have stock links. If I felt the need, would carry a spare sector, much smaller/lighter than a box. Part of the preflight inspection is checking for twist, no twist, good to go.
 
what was common, all had HD tie/drag links.

Great, just upgraded mine to tougher steel, guess I am going to source out a second hand box.

regards

Dave
 
All of these rigs made it home without destroying anything more than the bent drag link. Second rig is mine. Last one wins the award, though.

image.webp

image.webp

image.webp
 
Last edited:
Seems like it might be more cost effective to sell the HD links and go back to stock.

Given the grief I had getting them, I will not be selling them. I will consider the sector shaft mod mentioned by 'Tools' though.

regards

Dave
 
Plain and simple a link will be always cheaper, lighter to carry and easy to replace in trail .. so you might want an stronger box / sector shaft but stick with stock links ..
 
Fair enough and thanks for the info. I just re-did my TREs and kept everything stock so they would be the weakest link. Only running 35s. But I've been in groups where we've had to leave rigs behind because they had a complete failure, and didn't bring a part with them. Not my idea of a good time.

No twist right now, but I'll keep an eye out for one on the cheap to do the sector shaft upgrade and keep the links stock.
 
Back
Top Bottom