Build TiredIron's TLC build up

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

George, got the mag yesterday. Nice write-up! Its nice to see 80s getting the attention they deserve, especially yours. But I guess you have to have portals to get it:flipoff2:. That makes me miss the hills of Tennessee even more. Great work George! Now send me those portals!:beer:
 
normal_Krawler18.JPG

Could I ask you where you got that rear bumper tow hook and 3FE sticker?

What an awesome, unforgetable 80. Good luck with it.
 
Orange wheels? Bwahaha! ;)
 
Hey looks like your rear lower control arm is bent. Also what do you plan on doing with the front ARB bumper?
 
Hey looks like your rear lower control arm is bent. Also what do you plan on doing with the front ARB bumper?


Yea, both are bent a little and I just haven't had time to work on the bumper. I've been wheeling it too much I guess and have several big rides coming up in the next two months so it may be a while:o
 
I found that I was loosing 3" of travel on the rear axle so I redesigned the shock mounts which gave me the 3" back and a little more clearance.

This is what I had.

normal_DSCF0014~0.JPG

This is the extention, made from 1/4" flat stock.
normal_DSCF0013.JPG

You can see where the old post was cut off and relocated.
normal_DSCF0016~0.JPG

Finished.
normal_DSCF0017.JPG
 
Very cool idea. That should work out a lot better.
 
You can get a those hitches at any Tractor Supply or on ebay. The 3FE sticker was from the Yahoo 3FE forum, I heard they quit making them.

Sorry to hijack, but 3FE stickers can be self made for cheap at cafepress.com (no affiliation).:cheers:
 
Noooooooooo!!!!!!
 
Back
Top Bottom