Through Bolt - Modify Left Motor Mount?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Apr 9, 2013
Threads
236
Messages
2,160
Hey Y'all,

I see several guys in the 60 forum have modified their DS motor mount by drilling through the rubber and drilling out the original mount bolts. They then install a through bolt, which strengthens the mount of course but would also seem to negate the smoothing action of the OEM mount.

Is anyone doing that through bolt modification to their 80 series DS motor mount?

Thanks
Russell
 
Russell, I did this on my 60 after going through 2 OEM mounts in a year. Yes, it is not as smooth as when the rubber is actually giving you some cushion. But for me it was well worth that small price. If you do this be sure to use grade 8 bolts & washers.
 
I actually used a piece of chain from top of mount to bottom. If the mount breaks it won't allow the engine to move enough to chew up the fan blade and still allows for vibration dampening. Two years, no problems.
 
I actually used a piece of chain from top of mount to bottom. If the mount breaks it won't allow the engine to move enough to chew up the fan blade and still allows for vibration dampening. Two years, no problems.

Can you post a pic please? So you ran a bolt through the end links?
 
What's the purpose? I mean, do whatever you want, but I don't recall the motor mounts being an issue.
 
The purpose of my post is to inquire whether 80 owners are experiencing motor mount failure, and if so whether the through bolt mod is effective and/or common to avoid failure.
 
OEM 80 1fzfe motor mounts are designed to limit overal movement when they fail. Have seen a failed mount allow fan to shroud contact, but it was minimal and did not cause catastrophic failure. Have seen many 80s running 300-400,000 miles on original motor mounts. It is not a common failure on them.
 
Yes, I put a nut and washer on the mount studs and connected them with chain.Sorry no pics, and I was talking about my 60. I didn't notice you were talking about 80s. 60s do have a high failure rate of the drivers side mount.
 
Thanks for your responses guys.
 
The purpose of my post is to inquire whether 80 owners are experiencing motor mount failure, and if so whether the through bolt mod is effective and/or common to avoid failure.
No. Replace with new OEM and sleep well.
 
Back
Top Bottom