2mountainfish

If you can find a 3fe donor you could put a 2FE engine together. It’s really the engine that the 60 era should have had. Basically it’s the top end off the 3FE with the 2F bottom end. But it wouldn’t be a bad idea to pull your bottom end and...

Defiantly use Toyota gaskets whenever possible. I’ve learned the hard way multiple times, cry once buy once. I’ve had many aftermarket parts fail on me with this truck. Anytime I use OEM it serves me best. For the head gasket I most certainly...

Get the Toyota head gasket set and associated gaskets. Peace of mind.

I would try cleaning up the original paint as much as possible first.

Getting it home was a huge step, now I can work on it any time I want. Today I'm going to work on removing all the nasty old crap inside the thing and vacuuming out all the critter poop.

Hell yeah man!!! That sounds like it was an easy salvage! You could repair the original radiator yourself if you’ve got the tools and patience. It’s brass. Otherwise, it would be worth having someone else do it properly. It’s a really good...

Actually you will see that it’s flat and wide open and you just drive out there until you find a spot that you like and park ,no real marked spaces.

Anywhere to the left after you cross the bridge. The farther you are from Hammertown and Boone rd. the quieter it is. The ground is pretty hard packed and lots of options for setting up camp. Just find a spot, throw up some caution tape if you...

There are lots and lots and lots 2013+ 200 series Landcruisers currently for sale at $50K and lower. Most have about 100K on their odos. There’s an uncountable s*** ton of 100 series land cruisers for sale for dirt cheap. Check out Edmonds.com...

I’m running 33x12.50x15s on a 4” Terrain Tammer lift.

Clutch master gave up the ghost recently. Slave was replaced pretty soon after I brought her home in ‘16. Hoping it holds out since they do tend to go together. I put my one day short of 8.5 to work…. Then my delightful son, Sal says when he’s 18...

I had mine done at Perry’s Toyota in Bishop Ca. It was no problem and I never had to call corporate for help. I walked in, they looked it up on the recall list, ordered parts and a week later it was done.Here is a copy of my invoice. Good luck.

White Sands New Mexico

As an advocate for the devil and his memberships in MUD, maintain your pickup with love and enjoy it. However, the 60 series Land Cruiser will treat you best if you use her hard but gentle. She needs your most devoted love in exchange for the...

Awaiting uship quotes. Thanks!

19 spline output on the trans.

95949 ,Grass Valley, Ca. Came out of a 86 FJ60 with a 2F. I can get the spline count in the morning if you need it😎.

Final price reduction, $150

Yep, your cam shaft is just below the lifters shown and rise up and down in those bores.