thoughts on OEM vs CSF radiator

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
May 31, 2010
Threads
694
Messages
2,820
i just wanted share some experiances with my CSF radiator and my new OEM radiator. i have 94 that came with a CSF rad from the PO. I baselined it with new hoses, thermostat and fluid and new fan clutch oil. it never over heated per the dash gauge. but after adding dig gauge i noticed it ran "warm" on the highway. i saw 206-209 in atlanta in may on 75 deg days on the higway, no A/C. then driving cross country in Kansas at 70mph, head wind and 75-85 deg day it climmed up to 220 beforei shutthe ac down and turned on the heat. but i regularly saw well over 206 on the hiway. recently i broke the rad on a trail and picked up a new OEM along with anothe t stat and new water pump. now i see 188-192 at normal driving. on long flat hiways in WY and MT i see 192-194 with AC on 75 deg days at 70mph. up over MT passea on the highway i do have to slow down to about 50-55 becouse i hate reving the old motor. if i kick down the motor and work it hard over the mountains temps do climb. it will climb up to 199.4 and then actually drop down to 197. it has not gone up to 200 even with hours of highway driving with ac on. given it is not very hot up here but over all temps look much better with the OEM rad. just my experiances.
 
Last edited:
My 94 came to me last year with a newer aluminum/plastic radiator but I don't know the brand. I never heard of CFS. Is it made in China? What are they composed of?
 
I have a Koyo and never see temps over 200. Usually 185 to 190 with AC on.
I'm running a blue hub Aisin clutch with 15K oil and a slight temperature adjustment. When it gets warm/hot, you can hear it roar when you take off from a stop light, but it isn't bad.
Did you change out your fan clutch while you were doing all this work?
 
sorry. i think it was a CSF brand? i might have the leters in the wrong order but it is one of the comon ones. i didnt do the fan when i did the radiator becouse i had done it 2 months before and i wanted to change only a fewthings at once.
 
i am glad the koyo is working well for you. i have not used those at all. also it is posible that my after market one was a few years old and not in good shape even though it looled good and not old on the outside. for me the OEM was a good enough price comming from CDan that i didnt even consider a after market.
 
I did a radiator R&R for a brass-tubed Koyo about a year ago. Did the research here first and that looked like a good economical option. But I was relying on past posts about it. Turns out prices on the OEM radiators had fallen and I could have picked up OEM for pretty close to aftermarket prices. I think I recall that Koyo actually makes the OEM radiators, but may be wrong about that.

In any case, no performance issues. I can get briefly above 200 at times, but it's summer in the hot and humid Midwest. The mountains will be the real test, when I get a chance.
 
I just came across this post and wanted to give my $.02. I run CSF radiators in both my 80 and my 100. The 100 its been about 2 years now light off roading and is a daily driver no issues. My 80 its been about 1 year with heavy off roading and is also a daily driver with no issues, though I'm still always looking to drop the temps under loads. Currently the 80 cruising around town is 180 - 195 degrees w/AC on. hill climbs i'll see it hit 210 or so which I don't like i want to keep it at 190's under loads. I hope that helps.
 
I run a CSF here in the desert of Arizona aqua green Hub fan clutch 30000 oil I rarely see temperatures over 200 even with the AC on, I like the csf it's good quality
 
I had a CSF worked on by a local shop and they said it was high-quality. Relatively heavy duty gauge on the endtanks, good soldering, etc.

Still.. ended up running a brass koyo eventually.
 
Back
Top Bottom