third row seat gas can brackets

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Sep 20, 2014
Threads
2
Messages
6
Hi does any on out there know of a good Jerry can bracket that can be modified to bolt to the wheel well seat bolt holes? if so can you post a pic. I would like to mount one on each wheel well. Thanks for your time.
 
Does it have to be a jerry can bracket? Hanna and 4X4 Labs make cargo carriers for both sides.
 
4x4 labs cargo baskets will fit two sceptre cans. But not sure about carry fuel inside personally.
 
Got mine from 4x4 labs - great, stout product. I carry fuel and water inside with Scepter cans. At least until I get my bumper ;)
 
Got mine from 4x4 labs - great, stout product. I carry fuel and water inside with Scepter cans. At least until I get my bumper ;)

I built my own rack to carry two of the Scepter cans. I usually carry one water and one gas. Never have had any leakage or smell of fuel. No problems in over 3 years of use. I switched the spout on the fuel can over to the water spout version. It is easier to use. The California gas spout requires 3 or 4 hands to operate without spillage.
 
Carrying gas in a LC is probably safer than on the outside of the rig, IMHO.

Worst case scenario: you're in an accident in a LC (gas can is on the inside, mounted) and the accident causes the can to leak--you won't need to worry because if that's the case you're most likely wearing wings and a halo. Imagine the accident you'd have to be in that would cause the can to leak on the inside? Ugh.

Now, if you're driving a Jeep or some other vehicle I would say no, keep it on the outside of the vehicle.

The Rotopax also don't leak any smell inside the vehicle, fyi.

Zona
 
Back
Top Bottom