The Front Diff Really is Weaker in Reverse

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Apr 16, 2006
Threads
135
Messages
1,493
Location
Cardiff BTS & Tahoe
Note to self: "don't use reverse with the front locked after you take a s***ty line down a ledge and get pinned on the bumper at the bottom".

_MG_2473 copy.webp
_MG_2474 copy.webp
_MG_2476 copy.webp
_MG_2478 copy.webp
_MG_2479 copy.webp
 
Some what soft, but not fragile, can take limited abuse. The rock tractor in action.
file.php


No pictures of the tree tractor in action, but moved a couple dozen big trees (up to ~30") on Monday, mostly in reverse.
5-29-2017_15.webp
 
Nice carnage! Precisions were the go to best back in the day. Long gone though.

Curious too, if any pinion teeth broke.
 
It's an 8" ring gear running reverse on he coast side. This is nothing new. If you want to hammer your front axle with impunity, step up to a D60 hp. Then have all the fun you want.
 
That sucks.

The benefit of the high pinion is great stength in forward rotation.....but the weakness becomes reverse where the forces push pinion and ring apart. Way back when I stripped half the teeth of the ring gear in reverse on a high pinion Dana 30......it was ugly and noisy, and a 4 hour hike to the hwy for help.
 
It's an 8" ring gear running reverse on he coast side. This is nothing new. If you want to hammer your front axle with impunity, step up to a D60 hp. Then have all the fun you want.
Or just keep going forward
 
Or just keep going forward
Yeah, I learned my lesson the hard way. Unlock prior to reversing out of a jamb cuz she ain't no D60.
 
Yeah, I learned my lesson the hard way. Unlock prior to reversing out of a jamb cuz she ain't no D60.
So why not put in a dana 60
 
So why not put in a dana 60
The move to an 80 series was a push towards acting my age more than anything else. Second was it's versitility.

My last rig was trailer queen in 40's, d60hp, 14ff, atlas 4spd, np435, no roof, no doors.

One day I was towing it home and thinking, why not try something a bit more versatile even if it will require a bit more finesse at the helm?

And that's how I ended up with an 80. I just part timed it with RCV's and Aisin's. Time will tell.
 
Last edited:
The move to an 80 series was as more of a push towards acting my age more than anything else. Second was it's versitility.

My last rig was trailer queen in 40's, d60hp, 14ff, atlas 4spd, np435, no roof, no doors.

One day I was towing it home and thinking, why not try something a bit more versatile even if if will require a bit more finesse at the helm?

And that's how I ended up with an 80. I just part timed it with RCV's and Aisin's. Time will tell.
Pics?
 
Nice carnage! Precisions were the go to best back in the day. Long gone though.

Curious too, if any pinion teeth broke.

Pinon looks good. Will know more when it is apart.

It's an 8" ring gear running reverse on he coast side. This is nothing new. If you want to hammer your front axle with impunity, step up to a D60 hp. Then have all the fun you want.

No desire to hammer. I will just fix what i have. It has served me well for many years and this is my only real trail fix, ever. Guess it was just a matter of time before my luck ran out. I Just pulled the drive plates and front drive shaft and finish the trip in 2WD and was amazed how well the 80 did with locked 2WD . Needed a strap in a few places, but other than that, got through the trail quite well.
 
Back
Top Bottom