tap

[73lndcrsr]

Does anyone know where I can get a 17mm x 1.5 tap? I may also need a 19mm x 1.5 tap.

I have tried McMaster and Fastenal.

 

[JohnnyC]

http://www.victornet.com/cgi-bin/victor/productlist.html?subdepartments=Metric+Taps:602,902,604

like these

 

[Trollhole]

Does anyone know where I can get a 17mm x 1.5 tap? I may also need a 19mm x 1.5 tap.

I have tried McMaster and Fastenal.

travers

mecca for machine tools


https://www.travers.com/Default.asp

 

[Trollhole]

travers

mecca for machine tools


https://www.travers.com/Default.asp

page 139

And I don't see either one. And if they don't have it then probably noone has it. Are you sure you have measured it right?

 

[John Smith]

MSC Direct has them. http://www.mscdirect.com I can't seem to get a direct URL to work, sorry.

17mm
MSC # 04993820 Plug Type
MSC # 09036757 Bottoming Type

19mm
MSC # 04996146 Plug Type

 

[JohnnyC]

http://www.victornet.com/cgi-bin/victor/productlist.html?subdepartments=Metric+Taps:602,902,604

like these

Victor has the 17mm...i stand corrected...looks like i should start shopping at MSC Direct

 

[Medusa]

17 and 19x1.5 sound like TRE threads. If so, the above sources can provide the RH taps, but you will have a much more difficult time with the LH taps. For these I have had the best luck with
http://www.e-taps.com/

 

[73lndcrsr]

Thanks for all the replies, I am needing them for the tie rod.

I will verify the size tonight.

 

[73lndcrsr]

I can't seem to find a 21mmx1.5 tap. Would anyone have one I could borrow?

Thanks for any help on this one.

 

[TheGr8Doughboy]

By the time you buy all of those taps it might be easier to measer the tie rod and call Allpro or Marlin or something and just order the tie rod....

Just a thought
Chris

 

[zebrabeefj40]

BudBuilt can hook you up with new tierods as well. He's located in NC to so shipping is a fair bit cheaper. www.budbuilt.com

HTH,
Nick

 

[cranky steve]

You guys will thank me.

http://www.e-taps.com/