Suspension Bushings

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
May 11, 2007
Threads
124
Messages
917
Hi all,

Looking for some help regarding suspension bushings on my 67 FJ40. I had it on a lift and saw that the bushings are shot. The leaf springs are an Old Man Emu 2" lift kit that was installed about 10 years ago.

Here is a video Video Clip of the movement.

I have looked on line and and see there are OME bushing kits, but I am not sure of what part number I should be looking for. Also, are there better bushings I should be considering. Is the a mud vendor for OME I should be reaching out to?

Finally, what would cause the bushings to fail - this is a low milage truck.
 
@byron thanks for the link to the kit.

I didn't install this kit, but it it normal to have the bushing in the frame? The lateral movement looks like a lot, will new bushings resolve this?
 
You have an old school shackle reversal, hence the bushing in the frame.

New bushings definitely. I would check everything else while you're in there. Spring pins, u-bolts, clamps. I don't recall if OME has friction pads between the leaves or not.
 
Kurt, Cruiserteq shirts ? Send some for Rubithon please. To Ross not me.

I think Jason/Bryce packed up a Rubithon box with gift certs for the raffle and stickers/shirts for giveaways. :cool:
 
Back
Top Bottom