Steering Wheel upgrade

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Nov 6, 2002
Threads
23
Messages
169
Location
Massachusetts
Website
www.geocities.com
I did a search but all I got were threads about steering columns.

I just got myself a 1972 FJ40 and I am having a hard time getting my legs under the steering wheel. I am 6'-1" and even with the seat all the way back I can't get my feet to the brake without jamming the steering. Is there any good steering wheel replacement with a smaller circumference that anyone could recommend?
 
Last edited:
Grant makes a decent replacement but , you might wanna do a search on this board for extenders. I am not quite sure how they work but it allows you to gain an extra 2" or so of room.
 
masscrusher said:
No, no PS. I just need like 1 inch less diameter.

That's 7% harder steering. You'll notice it.

What kind of seats do you have? I'm 5'11" and I've been thinking about lowering my steering a bit. It seems kinda high to me.

There are also some threads about turning your seat brackets around backwards to get more leg room.
 
Fast Eddy said:
That's 7% harder steering. You'll notice it.

What kind of seats do you have? I'm 5'11" and I've been thinking about lowering my steering a bit. It seems kinda high to me.

There are also some threads about turning your seat brackets around backwards to get more leg room.

I think they are 4runner seats on custon perches, as the floor has been replaced with better metal. Perhaps cut the seat base and lower it a bit? I don't know, the new steering wheel idea appeals to me as the wheel is quite "worn".
 
I just put a Grant wheel in mine. IIRC, it's 16" in diameter which is the biggest 'normal' wheel I could find in the grant catalog. It's a noticeable increase in steering effort with my 33x12.50s, but not horrible.

Anyway, I had to special order it and I think it was about $60 plus the adapter kit.
 
For now look into the bracket that flips the seat anchors around. This allows the seat to move back almost 2". I am 6'4" and this made a HUGE difference. I think I got mine from Classic Cruisers in New Hampshire? They should be easy to make as well.

Also start reading about adding a power steering system. I think this is the #1 upgrade you can make to your 40. I would avoid adding one of those small steering wheels. They look cheesy and are less than useless on the trail. Even if you have power steering there may come a time when it might fail. Having one of those "pimp my ride" steering wheels will then be a real problem. I like the look of the old school stock steering wheels. To me adding a fancy racing wheel just looks out of place on a classic rig like the Fjf40.

Max
 
CruiserMax said:
For now look into the bracket that flips the seat anchors around. This allows the seat to move back almost 2". I am 6'4" and this made a HUGE difference. I think I got mine from Classic Cruisers in New Hampshire? They should be easy to make as well.

Also start reading about adding a power steering system. I think this is the #1 upgrade you can make to your 40. I would avoid adding one of those small steering wheels. They look cheesy and are less than useless on the trail. Even if you have power steering there may come a time when it might fail. Having one of those "pimp my ride" steering wheels will then be a real problem. I like the look of the old school stock steering wheels. To me adding a fancy racing wheel just looks out of place on a classic rig like the Fjf40.

Max
Agree.. the stock steering wheel is cooler looking. But the seats and mounts are not stock. But I'll have the cruiser in my house later this week ( I drove it today and will be sending money early in the week), so I still need to evaluate my options on the steering.
 
e rock said:
I just put a Grant wheel in mine. IIRC, it's 16" in diameter which is the biggest 'normal' wheel I could find in the grant catalog. It's a noticeable increase in steering effort with my 33x12.50s, but not horrible.

My '78 original wheel is 16.5" outside diameter. I'm surprised it's that noticable.

It's 7.5" from the bottom of my wheel to the seat. Don't go cutting your seat frame or not treating yourself to a new wheel on my account. I'm just sayin'...

:beer:
 
Heres a pic of my grant, nice wheel and very comfortable. I believe this is a 15" wheel, about $150 with the install kit. :Although, as others have mentioned without power steering this might be a little on the small side. Unless you are going to be driving on pavement the majority of time. Speaking from experience, I went rock crawling once before with a stock steering wheel, 33" tires and no power steering... just about broke my hand/fingers a couple of times. Needless to say, my next modification was a saginaw ps conversion :)
Tires for sale 020.webp
 
The seat extenders from Classic Cruisers only work on '73- 12/78 FJ40s. I put the extenders and a Grant wheel in my '78 and they both made a huge difference. The extenders, if you can figure out how to do it, will give both legs and knees a big break because you do not have to bend your knees as much to shift and brake. The Grant wheel gave my belly a break also. It does not rub any more.
 
Back
Top Bottom