Steering wander solved

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Sep 23, 2015
Threads
8
Messages
33
Location
Cedar Rapids
Thanks to all on here. I read a lot of threads about the white knuckle steering issues. I was certainly having it but had checked my TRE's, pitman arm, etc...and all were solid.

I had an alignment done as recommended and the toe in was off and my caster was +0.35 and +0.37.

This was on stock suspension height. Added 4 degree caster shims and it is a world better.

So this is just a statement that if anyone continues to have issues in this regard to spend the money on the alignment and shims! Sometimes it seems easier to simply start replacing stuff yourself but having a shop do the alignment was money well spent.
 
No. I have been told I have a stock setup.
IMG_4215.webp
 
Could be way off here, but those springs do not look stock. Just trying to figure out why stock truck would need 4 degree shims. The RS 42033 on the springs makes me think they are rancho spring aftermarket.

Sent from my SM-G920V
 
Last edited:
I agree with Darin. Those are lift springs. I believe the steering component that causes the most trouble but yet is overlooked 80 percent of the time is this bad boy right here:
drag link 2.webp


Drag link.
 
You may not have longer shackles but according to the number on the spring, they are Rancho 2-1/2" lift. That could have thrown off the stock alignment.
 
yes they are rancho. And stiff as hell :)

I was told it was stock by another mudder another time I posted the same picture.......thats why I say that. Sounds like the caster was off so there must be some lift. It shure has helped fixing it though.

I intend to go to OME springs front and back soon so may need to look at this all again then.
 
Back
Top Bottom