Steering Stabilizer

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

I am no longer using ANY steering stabilizer. There has been a dynamic shift in Landcruiser ownership and use in the last 15 years since I posted.

Mall cruisers don’t need to stabilize anything. And the off road crowd has largely opted for some kind of steering assist that as a byproduct largely negates the need for a stabilizer.


I would not say my rig is a mall cruiser by any stretch, it's also not a rock crawling rig either. That being said, I haven't had a steering damper/stabilizer whatever you want to call it this week on my 40 since I put it back together 2 years ago, it is on my list of to do's though.

I feel a properly built and maintained front end on these rigs doesn't require a damper, could it be useful, probably. There are some things that need to be learned about driving an older rig without power steering, and a damper.

Certain roads and goatpaths you have to pay attention on.

Be prepared for the steering wheel to do it's own thing and keep your thumbs on the outside of the wheel.

I say again, keep your thumbs clear.
 
Can someone explain how the stock mounted stabilizer can damage the center arm? Is it from impacting the stabilizer while rock banging and that impact getting transferred to the CA?
 
Can someone explain how the stock mounted stabilizer can damage the center arm?

I don't think anyone outright claimed that it would damage the center arm. The original statement I was referring to is that it would "knock it out of adjustment." It sounds to me like this means the steering dampener just tugs on the center arm assembly (meaning the cylindrical thing inside the bumper part of the frame) and loosens it up. I would assume this is fixable by tightening it up again, but I suppose that doing that over and over could damage it.
In any case, it sounds like it could be all moot at this point as many trusted FJ40 mechanics are saying that there are better solutions for stabilization in rock crawling situations than stock steering.
 
I am no longer using ANY steering stabilizer. There has been a dynamic shift in Landcruiser ownership and use in the last 15 years since I posted.

Mall cruisers don’t need to stabilize anything. And the off road crowd has largely opted for some kind of steering assist that as a byproduct largely negates the need for a stabilizer.

When I put the P/S on mid 1980 I ditched the stabilizer and haven't missed it on or off road.
 
Back
Top Bottom