Sputtering after ignition is turned off

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Sep 28, 2003
Threads
66
Messages
296
Location
PNW, WA aka wetside
The engine in my buddy's 40 will sometimes sputter after he turns the ignition off. This can last up to 5sec. What causes this and what can I tell him to do to fix it? Any advice appreciated....

We're currently putting in his OME 2.5" lift....it's been like 85 degrees today...not a fun day to be wrenching....

TIA
 
sounds like his timeing is off
 
try working on your rig when its like 105* :mad:

inkpot said:
Howdy! Check the fuel cutoff solinoid on the side of the carb. If it is sticking open then it will siphon gas into the carb after you turn off ignition.

this was the issue with mine, after I redid the wiring i hooked up the choke power from the ez kit to this. hot when ig is on, not when not. solved the problem.

mike
 
X2 the timing

we had to retard timing for emissions (yes, passed :bounce: :bounce: :bounce:) and it sputtered

after the test advanced timing again - sputter gone :D
 
Back
Top Bottom