Spring Spacers / Cheap Lift?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jan 31, 2003
Threads
952
Messages
10,248
Location
"the whale's vagina", CA
I am looking at swapping in some spacers to my 96 Fzj80 as a temporary minor lift until I can afford the full blown slee lift, I just want to get it up a few inches to gain some minor clearance over the stock height. I won't be changing tires either for now.

What is the maximum reccomended spacer lift? Is 2 inch spacers possible? What other things need to be changed out or altered when installing these?

thanks,

noah
 
I'm going to be making my own 2" spacers for the front. This is not ideal but is going to work for me since I need it on the cheap. Most recommend not to go much over a 1" spacer though.
 
I am doing a similar thing to mine. I got a pair of 2 inch ironman for the front for 70 bucks and 2 inch spacers for the rear. :hillbilly:
I know its not what is erecommended but its a cheap 2 inch lift. From what I have read nothing needs changed until you go larger than 2.5..Good luck with it and post some pics when you get finished. I will do the same.
 
I did it almost 2 years ago. I made 2.2 inch spacers for the front and rear. Absolutely no problems at all. No funky steering, no strange suspension behavior etc. I have the stock shocks.

Bear in mind that a spacer lift gives you just looks and maybe a tiny bit of better approach and departure angles. This is not a lift for serious off-roading because the shocks are almost completely extended and give you very little articulation and a very small negative travel.

It took me one day to disassemble the springs, measure what I need, cut it all from metal, weld it and install.
 
I did it almost 2 years ago. I made 2.2 inch spacers for the front and rear. Absolutely no problems at all. No funky steering, no strange suspension behavior etc. I have the stock shocks.

Bear in mind that a spacer lift gives you just looks and maybe a tiny bit of better approach and departure angles. This is not a lift for serious off-roading because the shocks are almost completely extended and give you very little articulation and a very small negative travel.

It took me one day to disassemble the springs, measure what I need, cut it all from metal, weld it and install.

There's almost no purpose to using longer springs or doing spacers and keeping the same length shocks.

Regardless if you use spacers or longer springs, you need to adjust your shocks to match.
 
Back
Top Bottom