Spring Pack Help: Removing Leafs

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

JuttyShabango

Checkers R Wreckers
SILVER Star
Joined
May 11, 2005
Threads
135
Messages
1,372
Guys,

I have a new lift (SUA) on my 40 and wasn't paying attention to the spring packs.

Well, I installed the 4.5 lift springs up front and the 4.0 out back...yeah, I know..:rolleyes:

My question is...can I remove some leaves from the 4.5 pack up front in hopes that the truck will lose some of it's lift?

Or should I just bite the bullet and swap em out totally?

I dunno...
 
i worked for a spring shop for over two years, if the springs are fitted properly. there is only one you can remove, and that's the bottom, you probably would not get a full .5" drop out of that.
removing any of the middle springs would cause about a 1" drop and that is because every spring below the one you remove would not be "working" properly.
 
i worked for a spring shop for over two years, if the springs are fitted properly. there is only one you can remove, and that's the bottom, you probably would not get a full .5" drop out of that.
removing any of the middle springs would cause about a 1" drop and that is because every spring below the one you remove would not be "working" properly.

I'm getting mixed reviews of this (not from this board) on the effect...

I have been told to take 2 out and replace with one stock leaf...not sure..

What I'm trying to avoid (not sure if I can really) is to go thru all the work of swapping them and then...realize they are way too stiff and need to take leaves out or put together a custom pack.

If that makes sense..I don't mind having to do that (make a custom pack or remove leaves for better flex) but don't want to have to do this 2wice..

A couple guys I respect that have done this suggest removing leaves now..as it's inevitable for better flex?

I'm just to the point that I need to hear other opinions....my head is swimming right now in info...
 
:rolleyes: This shouldn't even be a hard decision. Just do it.
You still may tear things down again after that. Ive had my springs torn down 3 or 4 times. Mixing and matching. Its never over, its all part of the fun.:)


:cheers:

aw
 
Last edited:
Back
Top Bottom