Spray Paint

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
May 10, 2006
Threads
99
Messages
501
Location
The Ghetto
Is there an adapter that can be attached to a rattle can of spray paint to make the spray wider? I've seen some spray handles that save your finger in the long run but i'm looking for an adapter that widens the spray.
 
Last edited:
Not that I am aware of, I do know that tower paints sells factory colors in a spray can with a wide nozzle.

maybe you could just replace the regular spray nozzle for a wide one.
 
I'm really not wanting to do a factory oem job here. I know it's Cruiser sac-religious but Canary Yellow is what I want to stick with. I was just thinking about getting a couple of cans of the basic Rust Oleum (yellow) at Auto Zone. Maybe one of those crazy spray handle jobs. First and formeost some filler and 320 for some bodywork.
 
Yes, a fan pattern is what you are looking for. I used the tower paint cans above and it turns out pretty good. I am convinced that paint is all about the prep and technique. If you want to see a spray painted truck I am almost done with the one in my signature.

Ryan.
 
Yes, a fan pattern is what you are looking for. I used the tower paint cans above and it turns out pretty good. I am convinced that paint is all about the prep and technique. If you want to see a spray painted truck I am almost done with the one in my signature.

Ryan.

Yep. It's called the EZ Touch Fan™ Spray Nozzle feature. I'm leaning towards this from Krylon.
 
I was just thinking about getting a couple of cans of the basic Rust Oleum (yellow) at Auto Zone.

Rust-o has a new (?) line of premium enamel that's about equivalent to PPG. I've used black and white. Use primer and be careful of moisture and any grease. Use a tack cloth as your last step before paint.
 
Spray nozzles are almost infinitely interchangable. It's as easy as removing the one that comes on the can with one that has a spray pattern that you like. Or you can use the time tested street method of heating a needle or paper clip and modifying the plastic nozzle on the can yourself. Good luck.
 
Back
Top Bottom