Sound systems

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Maybe cut the hole open and use a single din radio of choice?

Here is my FJ55 that I had cut open and stuffed stock Toyota radio and changer into:
radio2-jpeg.1297673



Was this premium sound with a external amplifier? I have a single CD but a changer with 6 CDs would be even better. Less monkeying around when driving. Did you have to extend the pigtail off the changer to reach the radio/head unit?
 
Just sold my 99 4Riunnet to my bother in-law who wanted it from the first time he seen it. Had a double DIN head unit with six CD changer. Pulled it as a spare for my FJ62 which has the same head unit. Thru a single DIN radio just like one you have because I knew he would change it out right away for a more modern features like a USB port. That's already done and he will probably give me my old radio back. He gave me the radio out of my mom's Highlander back after I give my sister the vehicle. Didn't have any cassettes at the time to check it out. I know I have one premium head unit with cassette player and single CD slave. The rest are all single CD head units and slave cassette which would not be as convenient to use installed in the glovebox.
 
I no longer own CDs or cassettes. Uploaded my entire collection to the cloud, and leave about 10gb stored on my phone. Use a Kenwood 1824bt amplifier. Sits perfectly behind the dash. Requires a 15A connection, so I wired straight from the battery with an inline fuse. Pumps out a lot of sound from my wake tower speakers. The remote hides under the dash when I leave my car. Outside of the wake speakers, you can't even tell I have a stereo. It is bridgeable, and I have it set up running 90w RMS over two channels. (Has 45w RMS over 4 channel). Pairs easily and functions great.

For anyone with an FM Radio installed, check out the Anker Roav Smartcharge FM Transmitter. I have it in my Toyota Pickup. Works surprisingly well (hands free calling doesn't work great as people have a hard time hearing me).

20190628_214613.webp


20190628_214558.webp


15626201817453644513421471214992.webp
 
I have LPs Cassettes and ever growing collection of CDs. Not of my music compressed and shaved on the top and bottom ends. Compressing music comes at a cost. I also find it much easier decided what I want to listen looking at the end of a CD case verses a tiny screen. Scanning thru my CD I end up finding some I would have never thought of. Neil Young said in a interview he hope that when people listen to his music at the Rock and Roll Hall of Fame it not a compressed version thru earbuds but rather thru real speakers the way it was originally recorded.
 
I have LPs Cassettes and ever growing collection of CDs. Not of my music compressed and shaved on the top and bottom ends. Compressing music comes at a cost. I also find it much easier decided what I want to listen looking at the end of a CD case verses a tiny screen. Scanning thru my CD I end up finding some I would have never thought of. Neil Young said in a interview he hope that when people listen to his music at the Rock and Roll Hall of Fame it not a compressed version thru earbuds but rather thru real speakers the way it was originally recorded.

Cassettes have poor SnR no matter what you do. MP3s sound better than tapes. My tapes all went to the dump 20 years ago.

I converted all of my CDs to FLAC. Time consuming, but worth it. Then I gave the CDs to a family member or boxed them in storage. All new music purchases have been in 24 bit FLAC when available, which has better then CD quality, (CDs are limited to 16 bit). My 40 is so loud that sound quality doesn't matter, but I definitely notice the difference on my home audio systems.
 
I use two kick vent speakers and an 8 inch powered subwoofer under the seat.
My stereo is smushed into the factory hole. Minor non permanent bending required.
It ROCKS ... pretty much just run bluetooth.
 
Cassettes have poor SnR no matter what you do. MP3s sound better than tapes. My tapes all went to the dump 20 years ago.

I converted all of my CDs to FLAC. Time consuming, but worth it. Then I gave the CDs to a family member or boxed them in storage. All new music purchases have been in 24 bit FLAC when available, which has better then CD quality, (CDs are limited to 16 bit). My 40 is so loud that sound quality doesn't matter, but I definitely notice the difference on my home audio systems.


I applaud your efforts. Way more than I have time or money to invest in. Have hundred of LPs. Plus even more CDs. A good perctage from music recorded over forty years ago. To create 14 bit FLAC what would you use LPs? Assume could be get than level from CDs. On cassettes I find them hit and miss as far as quality. Plus I have a few six cassette players with remotes which are a novelty which wouldn't be the same without cassettes to play in them.
 
I applaud your efforts. Way more than I have time or money to invest in. Have hundred of LPs. Plus even more CDs. A good perctage from music recorded over forty years ago. To create 14 bit FLAC what would you use LPs? Assume could be get than level from CDs. On cassettes I find them hit and miss as far as quality. Plus I have a few six cassette players with remotes which are a novelty which wouldn't be the same without cassettes to play in them.

I assume you meant 24 bit?

I have only converted CDs to 16 bit FLAC (as CDs are native 16 bit) I have purchased or downloaded 24 bit FLAC (lots of options for this, from subscription to less than legal options). There are very few studio recordings with the native dynamic range to allow the 24 bit to have a measurable difference, but there are some out there. Murfie will also convert your CDs for a small cost. Very worth it.


I also have most of my music on a drive hooked to my ASUS router (acts as a NAS) so it can play on any room in my house.
 
Back
Top Bottom