smashed my bumper today

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jul 12, 2007
Threads
108
Messages
509
Location
Norcal, not on fire but it was darn close.
Im not saying its my fault. But the jeep got the worst of the damage.

I have full collision, comprehensive unfortunate however with geico.

just a few questions, im told they wont cover aftermarket items?
My ARB bull bar is bent. My front fender fiberglass part is cracked off.

I have a claim, just curious how to deal with these geico people to insure I get my ARB bumper?
Any thing I need to say or do so I dont get tricked or better yet trick my own self out of a bumper?

I can upload a photo but im pretty depressed right now.

second, can ARB bull bar be bent back at a welding shop?
 
Last edited:
AFC882B0-739F-496D-B056-95F33AA7CCC6.webp


Geico wrote me a check for a new 4x4 Labs rear bumper w/swingouts when one of their drivers hit my parked 80. I asked them to have it powder coated to fix the scratches and the adjuster told me they had to buy me a new one because that’s how they did things. I took my $3,800 and had my original bumper Line X’d for $300.

Keep your head up. You might get lucky.
 
Don't know on the insurance for sure but if you can prove the bumper was on the car and undamaged before the wreck they may cover it. Some companies do make you specifically list aftermarket items you want covered (and charge you accordingly). ARB at least is not off road use only so that helps.

The bull bar possibly could be bent back, though if it bent the metal exceeded it's yield point and won't be as strong if you have another collision. Better option would be to cut off the bent bar, have the shop fab up a new one, and weld it back on.
 
If it's not your fault, the other driver's insurance should pay out exactly what is needed to return it to the condition it was previously.

Edit: I'd be looking for a new bumper seeing how bent it is. That would take a lot of work to get it looking good again...and now it is weakened.
 
can ARB bull bar be bent back at a welding shop?

As the others have mentioned, it wont be as strong as it was before. If you no choice, maybe some reinforcing could be added behind it.
 
Just as an FYI, it looks like you have either a '93 or a '94 which means you have fiberglass fender flares and I am pretty sure that the holes to mount them to the fender are slightly different than either the '91-'92 or the '95-'97 variations. I believe @slow95z told me he had a bunch of green parts rigs. You might ask him or one of the other dismantlers if you need to pay out of pocket for a new flare and it would be easier for you if you didn't have to paint it.
 
Quite the hit that ARB took but the “wings” aren’t particularly strong on those. The center section tends to be the strongest as it ties directly to the frame and is well supported. Like the others have said, probably best to get a new one with that amount of bending. As for damage to things we can’t see, that would depend on how the accident happened and the forced at play.

Things posted online are discoverable so I’m not sure if you want to go to that depth of explaining the accident.

Curious to see pictures of the Cherokee. Do you have any?
 
Curious as to your comment about not knowing who's fault it is? The front quarter panel will buff out and the flare is pretty easy to remove/replace. Plenty of parted out truck parts around. You could go flareless as some have done.

Agree with comments made - if it's the jeep's fault, their insurance should cover all the repair/replacement. I don't know about Geico, but I do know with Mercury that I have, they won't cover the aftermarket stuff I have on the truck unless it's a separate schedule and as stated above, charged accordingly! I'm no body/metal person, but I don't know if that ARB is repairable.

I know when I was hit in the rear and had the Kaymar bumper/tire swingout damaged, the guilty party's insurance bought me a new one. They even called the Kaymar distributor on price and what they charged for labor/time to install one and reimbursed me those hours at a shop labor rate of $35 IIRC for me to put in on myself!
 
yes the tires are done. I was actually ordering them on my way to costco. was trying to squeak the summer out before winter with one season.
I do not know about frame damage as the other driver slid past me pulling out the wing part of the ARB.

filing a claim. no smiles around this place today.
 
Just as an FYI, it looks like you have either a '93 or a '94 which means you have fiberglass fender flares and I am pretty sure that the holes to mount them to the fender are slightly different than either the '91-'92 or the '95-'97 variations. I believe @slow95z told me he had a bunch of green parts rigs. You might ask him or one of the other dismantlers if you need to pay out of pocket for a new flare and it would be easier for you if you didn't have to paint it.

My '97 was hit under the previous owners reign of terror and as a result, the passenger rear flare is fiberglass, where the rest are plastic. I'm not sure what they did to get it on there, but as best as I can tell without removing it, it's on there just the same as the original. I didn't know the '93-4 flares were glass, so I just assumed it was aftermarket.
 
i would be willing to bet they swapped out the fender and got the factory flare that came with it.

Not on the rear.........
 
Back
Top Bottom